I wish I had a better picture than this but you get the point.
It shows up even better in the daytime.
Without the brake on, you cant even tell it's modded. It just looks like a stock 3rd brake light.
Oh, I also have new tint now so it's not purple/blue anymore. Pics coming soon.
Who likes?

 

Oops, I forgot the picture!

 

thats pretty cool i didnt notice it at first but then i saw it. thats pretty cool.

 

howd ya do that?

 

I like it... but the pic is upside down

 

Yeah, I noticed that too. Appearantly the pic was scanned upside down and then saved onto disc that way.

I took off the red plate from the 3rd brake light. I then taped a bowtie to the inside, then I masked around it. After that, I took the bowtie out of the center and then masked the area it was covering and took the other masking tape from around it off. I then sprayed it (the inside of course) with a couple layers of red paint. IAfter that I used some black piant. The red paint makes it look like a plain brake light from outside, and I used the black so not as much of the light would get through to the red. Pretty simple and olny took about 30 minutes.

 

Here's the pic the way it should be:

 

Thats cool, but I don't like how there are 2 chevy symbols so close to each other.

 

I agree.

 

Yeah I thought about that. I'm thinking about taking off the sticker, it's starting to turn orange anyway.

This thread is getting alot of views but not alot of replies! Come on people, tell me what you think, good OR bad!

 

I was thinkin the same before I read your reply.

 

i wouldnt do that mod.
i dont like the sticker.
looks good if you want me to say something positive

 

me2

love the light tho. very cool, and looks pro.

 

Looks cool. I want to do the same thing to mine but I want mine to say Z28 on it.

 

Easy enough.

I thought it would be cool to have an LT1 swapped in and then make it say "LT1"

 

Nice job, I have thought about doing that to my other car. I can't do it to this one, mainlky because it is a FIREBIRD!!!! But nice job, I would remove the sticker though.

 

I would want to do that, but my third brake light doesnt work and I cant figure out why.

 

So how did you do it. I like it and would consider doing it to my RS

 

i like it. i have had flames in mine for quite a while now. its the subtle things that might go unnoticed that i favor.

 

EXACTLY!


Ibrohez, I told how I did it already, scroll up.

Quick 6, from what I've heard that's a pretty common problem.

88Bravo, do a Pontiac Arrowhead shape or make it say "TA"


Keep 'em coming....

 

Do you have a picture of it during the day time??

 

this is what i did for my bird

 

I like it, but dump the other sticker.

I did something simular. I took a black bowtie and applied it to the out side of my break('86 outside the hatch) light. Now when it lites up you see red around the bowtie and in the daytime it looks like a black bowtie. Only took 5 minutes but look great. Sorry no pics yet.

 

trigger gta- wow yours looks very nice and clean. very porfessional look keep it up.