Just wanted to share some pictures of my Almost Chrome powdercoated SuperRam befor its long gone... Enjoy

I never got around to using it. Long story Short. I bought a Holly Stealth Ram from Big Mike. powdercoated it and didnt really like the tissue Box looking plenum. So got rid of it for a SuperRam Ya Ya a Pizza box looking intake.. I polished it then shot it with almost chrome powder. Well I talk to JMatlock88 like every day and really like the looks of his HSR now that it was milled to remove the fins and polished. So Im buyin another HSR having the fins removed and powdercoating that one also..

Will post pic's of that one later also. SO here are some PIC's of the SR....







and Here are a few of the HSR I had also...
HSR COATED1

HSR COATED 2

a stock TPI the SuperRam befor polishing and coating and the HSR after it was done

 

that looks great!!

 

Nice job dude!

 

bling bling! lol looks good man almost as shiny and reflective as a mirror!

 

Are you selling the superram? If so I would be interested...

 

Do you have any more pics of the TPI LTR setup? I am thinking of going with the "almost chrome". Do you recommend polishing it to smooth out any cast marks before powdercoating?

 

I would polish before applying the powdercoat, it will look much better. That is what I did with my intake.

 

check the classifieds The add is there...


LTR pic's and pleanty other can be seen here

www.lastgen.com/tpi383/links.html


Yes Sand and Polish 1st You will be much happier with the results

 

is that ceramic coating or a color of powder coat?

 

I 1st sanded and polished it. Then PowderCoated in whats actually Called Mirror Silver. Same thing as Almost Chrome
I use powders from Tyger Drylac Co..

 

Can you do a clear powder coat? I have been meaning to ask around if a clear coat would dull my polishing job even the slightest bit, if so, forget it, but if I could clear it, keeping it clean would be much easier.

 

Another shot...

 

absolutely not, the only way would be to chrome plate on top of that perfect shine.........you'll only ruin it. that type of finish is a platers dream to apply chrome on though.

 

Clear would prob dull it a little. I havent yet tried to polish something up and clear it.

Do you have the stock lid still? If you do Polish that puppy up and ship ity my way Well test it out.

Buy Ya man that is a perfect piece to Chrome Plate. I was gona have my Sr hrome plated and They said It would be polished 1st Then chromed. $300 but this place wont do lower intakes because he said he cant get a good coat in the creveses(sp) and if he leaves the part in to long to get em good It might eat away at the aluminum.

So i didnt get anything done. I just powdercoated it myself.

 

How much would you say a nice powder coating job should cost? On say a miniram. I was quoted at atleast $250. Give me a ball park figure i guess. thanks

 

$250 to PowderCoat a Mini Ram is assinine..... E-mail me and Well talk....

I dont want to get into it on the board since Im not a sponcer YET.
But I'll tell you this.. My prices will not be beat by anybody!!! ( as long as its a ligetamate quote) I will beat it.

 

Thanks for taking the time out for me! I'll get back to you-Bryan