Post engine bay pics up here... from stock to modified...

 

Really, not being an ***, but try a search. You can find whatever you want with it. True, i have never posted a picture before, but i know for a fact there is a thread like this once a week with people showing off their cars. Try it out ,see what you find. good luck

 

yeah try a search but if u dont find anything.....heres my totally stock 305

 

stock..

 

Take it as you will..Not stock..

 

Heres mine

 

Stock...

 

Stock-ish...

 

Scrap metal...

 

Here is mine...

 

2

 

3

 

RU QWIK, i could use some guidence! Are you using the K&N breathers, if so, are they the 1.25" ones? I have the same valve covers and the K&Ns. The problem is, i am using the required hole saw bit and it is still too small of an opening! I have yet to get a breather in the opening. Before i go out and spend another $12 on a bit, i would just like to know if i am missing something here. Thanks for your time.

 

yea mines stock. umm yea thats it

 

 

More on the webpage

 

Looks stock....:lala:

 

Hopefully I am going to give you usefull help here... yes, I have a K&N breather in the valve cover... Here, these should show all. Even the mess from all the oil

 

2

 

not much but still my baby

 

3

 

Or is it?

 

4

 

5

 

6

 

 

Far from stock ... my underrated LO3

 

CustomX,

That is a nice clean, well sorted out engine bay

 

Damn you! lol You have different ones than me. Mine are the push in ones with a large black grommet on the bottom. Thanks for the pictures though. They are clear pictures if it makes you feel better! j/k Thanks for the time man. So, why did they leak? Do they do it all of the time or was it a freak occurance? Thanks again for your time.

 

I have the standard centerbolt style breather. it coems with a black plastic trunk that you can either cut or you can adjust the hight of the fliter part before tightening down the clamp. very similar to the lt1 style (wihtout the back plate).

 

 

My breather leaks oil most anytime I drive the car, even with the PCV valve hooked up on the other cover, very annoying to say the least. A little simple green and some water takes it right off though.

 

dude, and you were calling my headlight swap a hack job?

 

Alright, thanks for the tip too. That stuff does work great on almost anything. thanks again

 

Its stock, seriously. Sorry guys, couldn't resist.

 

What a damn post *****! lol Too bad that paint does not do anything for that car , AT ALL. Well, IMO anyway. But then again we all know what my opinion is worth!

 

Nothin special here..

 

gotcha all beat.

 

raw power....bout 95 horses baby.

 

for those of you guys with tpi camaros, how do you get the snorkel piece to be so clean??? i've tried a bunch of products on mine but it still seems to look dull any tips on how to shine it up?

 

Doesn't look like headlights to me? All of that is work in progress, a lot of chit still to be done. I suspect you'll be attacking me every chance you get because I didn't find the way you mounted your headlights to be very appealing to me.

 

Meguires Gold class tire gel on all the black plastics/rubber. Ont he paint inside thier too if its black.

 

thanks for the advice customx, i'll have to give that a try when i'm home on break from school