fender trim is it too "*****" or not
Thread Starter
Banned
Joined: Nov 2000
Posts: 305
Likes: 0
From: CANADA [the home of real hockey players]
fender trim is it too "*****" or not
i saw a camaro that had these chrome plated stainless steel wheel well trim things on it and wonderd, is this to "***** for a third gen?". i personally love the way it looks but would like to know how other third gen owners feel about after market addons like this. IS IT RICE OR IS IT OK?
Dont worry about what people here think. Its not our car its yours. So do what you like. If you ask me Ive seen it on camaros and personally I dont care for it. But I wouldnt call it ***** either. I just dont care for it.
------------------
1992 Camaro RS 3.1L
T5 Manual 5 speed
Open Air Intake
Z-28 Exhaust
8.5mm MSD Ignition wires
------------------
1992 Camaro RS 3.1L
T5 Manual 5 speed
Open Air Intake
Z-28 Exhaust
8.5mm MSD Ignition wires
Supreme Member
Joined: Oct 2000
Posts: 1,780
Likes: 0
From: Warner Robins, Ga
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: 700R4
I agree, don't base your car on our opinions... Well, sometimes you can, But your never going to find something that everyone likes. Best bet is to do it if you like it. If you have a picture, I could give you my opinion.
Do whatever you want to your car, man. Thats why its YOUR car and not ours. Personally i dont like it, and i dont think its even a ***** issue. Its more of a homie drivin a slammed caddy listening to snoopy dogg dog kind of a thing. Leave it for the guys with silver capped teeth, and 25lb chains around their necks. Thats why they get all that stuff you know, to match their chrome fender trim.
------------------
"Ever notice how imports sound like weedwackers"
------------------
"Ever notice how imports sound like weedwackers"
It's not really ***** as opposed to...well, i guess ghetto would be the word I'm looking for.
BUT, to each their own, your car, your money, your opinion. I know People rip on me for having a huge cowl and no need for it, but SCREW UM', its my car. 
------------------
'87 GTA
Automatic 350 TPI
2 3/4" Flowmasters
K&N filtercharger
4 3/4" Glasstech Cowl induction hood
TPI intake air foil
Planed mods:
10 bolt rear end-3.73 posi- next week
6 speed manual trans.-next month
383 stroker...maybe
BUT, to each their own, your car, your money, your opinion. I know People rip on me for having a huge cowl and no need for it, but SCREW UM', its my car. 
------------------
'87 GTA
Automatic 350 TPI
2 3/4" Flowmasters
K&N filtercharger
4 3/4" Glasstech Cowl induction hood
TPI intake air foil
Planed mods:
10 bolt rear end-3.73 posi- next week
6 speed manual trans.-next month
383 stroker...maybe
Trending Topics
WEll it looks like the pimp has entered the room. LOL. Well anyways what kind of 3rd gen do you have, I have a Firebird and take a look at my car. It has the stainless steel fender flares and they look sick as hell and I love them. The main reason why I got them was not b/c of a looks thing. One day driving home this big old rock got caught in the tire and flung up against the top of the wheel trim in the fender and chipped the crap out of the paint and I decided no more. Ever since then I got it repainted and the fender flares have been put on. I love the way they look: http://www.angelfire.com/ca3/86bird
- Mike Harvey -
- Mike Harvey -
Thread Starter
Banned
Joined: Nov 2000
Posts: 305
Likes: 0
From: CANADA [the home of real hockey players]
i used the term "*****" cause i see alot of civics and accords with this product on them, and the last thing is this worls i wanna be is put in the sam catergory as them.
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
I think they look absolutely horrible.
If you put them on, make sure to the the $.03 chrome door moldings and put it on every panel edge you have, including but not limited to the fenders, hood, windows and hatch. Liberal application of chrome tape will give your car that winning look and tell people "My car is fast".
Sorry. Couldn't resist. Do whatever floats your boat, but since you're asking for opinions, you got mine.
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
If you put them on, make sure to the the $.03 chrome door moldings and put it on every panel edge you have, including but not limited to the fenders, hood, windows and hatch. Liberal application of chrome tape will give your car that winning look and tell people "My car is fast".
Sorry. Couldn't resist. Do whatever floats your boat, but since you're asking for opinions, you got mine.

------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
well, in my opinion (not that it matters), the chrome can look kinda tacky on some cars. What about the ones that are black or something...depending on what color your car is, they can look good, yet subtle.
------------------
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood
------------------
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood
Thread Starter
Banned
Joined: Nov 2000
Posts: 305
Likes: 0
From: CANADA [the home of real hockey players]
i always wonder how the chrome gas filler plate looked like on a camaro. thanks for the pic. and i think i will go out and buy a set of these wheel well trim things for my 89. when i can figure out how to put up a pic i will show u guys what it looks like.
Member
Joined: Sep 2000
Posts: 377
Likes: 0
From: Edmonton Alberta
Car: Trans AM
Engine: 305 TBI
Transmission: 5spd
To me, putting on that trim, would be like putting on cheesy bumper stickers, or those tailpipes that stay on with the one screw(those are the worst of all).
The only stick on mod that I would do, is tint.
[This message has been edited by Godti (edited November 09, 2000).]
The only stick on mod that I would do, is tint.
[This message has been edited by Godti (edited November 09, 2000).]
Member
Joined: Oct 2000
Posts: 379
Likes: 0
From: Shelbyville, IN
Car: 92' RS Camaro
Engine: L98
Transmission: 700R4
I don't care for the big wide chrome trim, but at www.jcwhitney.com you can get door/wheelwell/ chrome trim that is just an accent, i think that really adds to your car. it's alittle smaller then the chrome trim like on a s-10. I saw a purple car with that and it was badass. He even ran it up the door too.
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Originally posted by ihateallmustangs:
so what your all trying to say is chrome and camaros dont mix then?
so what your all trying to say is chrome and camaros dont mix then?
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
Senior Member
Joined: Jun 2000
Posts: 515
Likes: 1
From: Webster,Texas,USA
Car: 1990 Formula
Engine: 5.7 liter
Transmission: 700R4
Originally posted by Mike Harvey:
I have a Firebird and take a look at my car. It has the stainless steel fender flares and they look sick as hell and I love them. The main reason why I got them was not b/c of a looks thing. One day driving home this big old rock got caught in the tire and flung up against the top of the wheel trim in the fender and chipped the crap out of the paint and I decided no more. Ever since then I got it repainted and the fender flares have been put on. I love the way they look: http://www.angelfire.com/ca3/86bird
- Mike Harvey -
I have a Firebird and take a look at my car. It has the stainless steel fender flares and they look sick as hell and I love them. The main reason why I got them was not b/c of a looks thing. One day driving home this big old rock got caught in the tire and flung up against the top of the wheel trim in the fender and chipped the crap out of the paint and I decided no more. Ever since then I got it repainted and the fender flares have been put on. I love the way they look: http://www.angelfire.com/ca3/86bird
- Mike Harvey -

------------------
I have experience...unfortunatly,its a result of bad judgement.
http://www.members.tripod.com/~Astra...uild/front.htm
or click below to email me
astralbaby11@hotmail.com
Thread Starter
Banned
Joined: Nov 2000
Posts: 305
Likes: 0
From: CANADA [the home of real hockey players]
ok, what about this big chev bow tie stickers you see on the back window? any opions on those things? [dont try to tell me that putin any type of sticker on your car isnt RICE].
Well actually Formula90 I would of had to put that flap at the top of the wheel well to avoid that rock that caused the paint chip. Look smart *** , he asked for opinions and he got them, he didn't ask for members to start slaming each other.
- Mike Harvey -
- Mike Harvey -
Member
Joined: Jul 1999
Posts: 479
Likes: 0
From: Calgary, Canada
Car: 1986 Trans Am
Engine: 305 TPI
Transmission: Auto
Rice? maybe, but u asked if we liked it so my answer would be...No. GM went through a lot of trouble to get rid of all the chrome.
theres my 2 cents
theres my 2 cents
here's my coupe with the bowtie sticker you're talking about also. the outside pic makes the sticker look faded, but it really isn't. i like it.
i also have red neons under my car, but hey, it is my car. if every third gen looked the same, then they woudn't be special to us. originality is the key.
i also have red neons under my car, but hey, it is my car. if every third gen looked the same, then they woudn't be special to us. originality is the key.
Senior Member
Joined: Oct 1999
Posts: 6,621
Likes: 2
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
Opinion: I don't like it.
Reasoning: What does it bring out? How we have fender gap? I always liked the body color style where everything that can be is painted the same color.
Remember: Just an opinion so take or leave.
Remember2: Everything looks good as long as YOU like it.
------------------
, Jon (91 RS too many mods to list)
Reasoning: What does it bring out? How we have fender gap? I always liked the body color style where everything that can be is painted the same color.
Remember: Just an opinion so take or leave.
Remember2: Everything looks good as long as YOU like it.
------------------
, Jon (91 RS too many mods to list)
Senior Member
Joined: Jun 2000
Posts: 515
Likes: 1
From: Webster,Texas,USA
Car: 1990 Formula
Engine: 5.7 liter
Transmission: 700R4
Originally posted by Mike Harvey:
Look smart *** , he asked for opinions and he got them, he didn't ask for members to start slaming each other.
- Mike Harvey -
Look smart *** , he asked for opinions and he got them, he didn't ask for members to start slaming each other.
- Mike Harvey -
------------------
I have experience...unfortunatly,its a result of bad judgement.
http://www.members.tripod.com/~Astra...uild/front.htm
or click below to email me
astralbaby11@hotmail.com
I agre with Jim85... There's a fine line between custom and overkill.
Also, keep in mind what it's going to do to Your paint if You ever decide to take the stuff off. I once put the rocker panel "chrome" stickering on My cars' sides...(I'm so ashamed to say that) and it was a horrible nightmare to get it off...not to mention what it did to the paint.
I think if You start with all that stuff, before You know it, You'll have curb-feelers,mud-flaps, and that trim tape (that Jim mentioned) all over every edge of the car. Just My little opinion... It's true, though...You gotta do what YOU want and like.
Also, keep in mind what it's going to do to Your paint if You ever decide to take the stuff off. I once put the rocker panel "chrome" stickering on My cars' sides...(I'm so ashamed to say that) and it was a horrible nightmare to get it off...not to mention what it did to the paint.
I think if You start with all that stuff, before You know it, You'll have curb-feelers,mud-flaps, and that trim tape (that Jim mentioned) all over every edge of the car. Just My little opinion... It's true, though...You gotta do what YOU want and like.
Member
iTrader: (2)
Joined: Aug 1999
Posts: 360
Likes: 0
From: Stafford, VA
Car: 2000 Corvette FRC
Engine: LS1
Transmission: M6
Ok.. everyone says its your car do what you want blah blah blah.
Its the pure definition of RICE, don't do it. Fugliest thing I have ever seen in my life
Its the pure definition of RICE, don't do it. Fugliest thing I have ever seen in my life
Member
iTrader: (2)
Joined: Aug 1999
Posts: 360
Likes: 0
From: Stafford, VA
Car: 2000 Corvette FRC
Engine: LS1
Transmission: M6
so what your all trying to say is chrome and camaros dont mix then?
Chrome looks good on classic cars.. those chrome wheel eyebrow things look like crap on ANY car.
Senior Member
Joined: Jan 2000
Posts: 539
Likes: 1
From: Upstate NY
Car: 87 IROC-Z
Engine: =350 sbc
Transmission: TH350
Axle/Gears: 3.73
i have them and i love them.but i like chrome on my car........peace Check out my car down by the sig
------------------
1987 BLUE IROC
IT'S A DOG
BUT IT'S MY DOG
AND IT HAS A NASTY BITE......
http://members.fbody.com/cnyfbodies/tonyrusso.jpg
------------------
1987 BLUE IROC
IT'S A DOG
BUT IT'S MY DOG
AND IT HAS A NASTY BITE......
http://members.fbody.com/cnyfbodies/tonyrusso.jpg
Supreme Member
iTrader: (10)
Joined: Jul 1999
Posts: 1,780
Likes: 2
From: Fla
Car: 90 IROC
Engine: 406
Transmission: GMPP 93/4L60
Axle/Gears: 9 bolt 3.27
Like everyone else is saying its your car do what you like. 
I dont like it though it looks tacky. It kills the whole monochromatic look of the car.
------------------
Black 90 IROC, L98, A4, 323 gear. SuperRamed 406 in the works!

I dont like it though it looks tacky. It kills the whole monochromatic look of the car.
------------------
Black 90 IROC, L98, A4, 323 gear. SuperRamed 406 in the works!
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
I agree with Mike.. it highlights something that never should've been highlighted in the first place.
Ever see the cars where the paint is faded all to hell, and the car's rusting away, but they've got those chrome fender lips in perfect shiny condition? LOL...
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Ever see the cars where the paint is faded all to hell, and the car's rusting away, but they've got those chrome fender lips in perfect shiny condition? LOL...
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
no one should knock him for his personal taste it just helps the rest of us to look better. but seriously, if i were u i wouldn't put those things on your car. that is unless your in highschool then i guess it might be ok. you really should spend your money on better things though, you made the right choice with the car, don't mess it up!
------------------
candyred 91z (why do u ask officer; doesn't it sound stock?)
------------------
candyred 91z (why do u ask officer; doesn't it sound stock?)
hey did you guys consider this? Taking a wire wheel and getting the chrome off, then sanding down and painting to match the body color of your car? I like the way they flare out the fenders but definately not the chrome!!
------------------
1986 camaro with 92z28 gound effects, aero wing, 4 3/4 Unlimited products cowl, 3.90 auburn gear rear-end with Steve Spohn adj LCA's,Panhard bar. 406 stroked to to 429 motor in the works to replace 2.8. just my 2 cents
------------------
1986 camaro with 92z28 gound effects, aero wing, 4 3/4 Unlimited products cowl, 3.90 auburn gear rear-end with Steve Spohn adj LCA's,Panhard bar. 406 stroked to to 429 motor in the works to replace 2.8. just my 2 cents
Thread
Thread Starter
Forum
Replies
Last Post





