I was in the process of ordering corvette ZR1 rims(ex.98'-99'camaros ss) from this guy who was charging me $800.00 for all 4(I want the cast looking ones,chrome ones look nasty). Anyway i turned it down mainly on my discovery of other places that sells them cheaper. Ive tried ebay someone wants 750.00 for it, i've tried SLP they want $700.00 for it but thats the lowest i've seen. Are there any other places that i might find for an even cheaper price. Its not that im cheap or anything im sort of on a budget. U know what im talking about

------------------
92' camaro
New 305 block TPI conversion, Flat top pistons,Bore over .30 Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners Home aid cold air induction, Air foil,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system, and a 3 inch cutout,Zoom multi friction clutch, T-5 tranny,billenstien shocks&struts.
Soon to come!!!
Procharger system 12lbs o boost.
New paint job(hawaiin orchid purple)Cast alluminum ZR1 rims w/ 275 tires.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

 

Sounds sweet man!!! Im a very soon owner of a 84 corvette and thats exactly the rims I want!

 

Take my advice, do'nt buy an '84. Spend a couple more dollars and get an '85 or newer.

 

I second that. 84 was a horrible year for Corvettes. On the other hand Camaros shined in 84. I think in 85 they also did some major suspension upgrades (though I could be wrong, I'm not a Corvette buff). Just from what I've seen my dad have. He had an 84, an 85, and a 95.

 

Back to the question anyone know where they sell those rims for a cheap price

 

ok kewl Yah the 84s have cfi motor...Im not too sure what im gonna get yet. But I will get a 85 or newer. and i kinda have my heart set on a 1992 caddilac seville! hmmm im blabbing again

 

damn it back to the question

 

Sorry, that sounds pretty cheap. But back to the heat on the 84 corvette check this page out. There's more recalls than parts on the damn car i think!!!

http://www.users.acs-isp.com/crowz/1984.htm

 

Damn! LOL!! Vortech's steaming and I don't blame him. What happened to the initial question??

 

u know what forget it ill go and find it myself.

 

Hey you might want to make sure the bolt pattern fits I dont know if its true but i herd that 93 and up Camaros/Vetts have a different bolt pattern. About prics on the rims 700 seems to be a good price

 

I have the backspacers $700.00 is still too much i know there are places out there for even cheaper just cant find the right reply's just yet!

 

I think SLP has the cheapest that I have seen them. Also if you buy the tires with their package, you would be saving a whole lot of money. And if you can't afford more than $700.00 I would say to take your chances on ebay or just find a different set of wheels.

JMO

------------------
SS 17x9.5 wheels,
HOTCHKIS 1"drop springs,
HOTCHKIS tower brace,
Bilstein struts and shocks,
K&N filters,
MSD 6A,
MSD 8.5mm Wires,
MSD Cap & Rotor,
Hypertech airfoil,
SLP intake runner (plennum not ported yet, soon)
High flow cats,
SPOHN panhard bar, lower control arms, and subframe connectors,
Baer front track system,
3" Flowmaster Exhaust System,
2100 Stall High Performance Torque Converter,
300 watt sound system,
and soon to come...ZZ4 crate motor...hopefully.