Cleaning bare aluminum intake?
#1
2011 Norwood Gathering
ThirdGen Firebird Rep
ThirdGen Firebird Rep
Thread Starter
Join Date: Jun 2000
Location: Sarasota FL
Posts: 3,435
Likes: 0
Received 3 Likes
on
3 Posts
Car: 99 WS6 / 00 SS / 11 CTS-V / 13 300
Engine: LS1 / LS1 / LSA / 5.7 Hemi
Transmission: 4L60E / T-56 / 6L80E / W5A80
Axle/Gears: 3.23 / 3.42 Auburn / 3.23 / 2.62
Cleaning bare aluminum intake?
What should I use? My Performer TBI bare aluminum intake has some spots on it around the thermostat area, from the tech changing the thermostat. It should be pretty much dried coolant and grease. What should I use on a rough surface like this? An aluminum polish like Never Dull?
Thanks to anyone who can help!
Thanks to anyone who can help!
#2
Moderator
Join Date: Jan 2000
Location: Mercedes Norte, Heredia, Costa Rica
Posts: 20,981
Likes: 0
Received 9 Likes
on
8 Posts
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Cleaning bare aluminum intake?
I've always had better luck with covering it up with aluminum engine paint than cleaning it once its stained.
#3
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: Cleaning bare aluminum intake?
I would spray brake cleaner on the surface. This should remove most stains. If the aluminum is oxidized from contamination, you should try some steel wool and buff the area.
#4
Supreme Member
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,651
Likes: 0
Received 45 Likes
on
43 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Cleaning bare aluminum intake?
heavy duty grease remover and a brush to clean off the crap, then a wire wheel on a drill works very well to break up the oxidation and spruce up the finish a little. When its good and clean and free of oil/grease/degrease, a quick coat of clear will keep it looking good for a good while
#5
Member
iTrader: (1)
Join Date: Jan 2006
Location: Saginaw, TX
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Firebird
Re: Cleaning bare aluminum intake?
I second the engine paint method. It looks like the original aluminum, cleans easier, and touches up easily. Because the aluminum is porous, once it's stained it will probably never look like new again.
#6
Supreme Member
iTrader: (1)
Join Date: Aug 1999
Location: Rowlett, TX
Posts: 2,842
Likes: 0
Received 5 Likes
on
5 Posts
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Re: Cleaning bare aluminum intake?
I had really good luck with this stuff called Greased Lightning blast, a toothbrush to get into all the tight spots. I think it was around $4 or so at wal-mart. I also used a steam cleaner to clean the gunk out of the ports, and a couple of the really tough stains.
http://housewares.hardwarestore.com/...st-626631.aspx
http://housewares.hardwarestore.com/...st-626631.aspx
Trending Topics
#8
2011 Norwood Gathering
ThirdGen Firebird Rep
ThirdGen Firebird Rep
Thread Starter
Join Date: Jun 2000
Location: Sarasota FL
Posts: 3,435
Likes: 0
Received 3 Likes
on
3 Posts
Car: 99 WS6 / 00 SS / 11 CTS-V / 13 300
Engine: LS1 / LS1 / LSA / 5.7 Hemi
Transmission: 4L60E / T-56 / 6L80E / W5A80
Axle/Gears: 3.23 / 3.42 Auburn / 3.23 / 2.62
Re: Cleaning bare aluminum intake?
I will try the brake cleaner...didn't think of that. The intake is currently on the car, and 90% of it looks perfect (its only been on the car for a little over a year), so painting it probably isn't the best idea...we're talking faint spots, like coolant stains or something. There is no oxidation.
Would brake cleaner and steel wool be ok? I don't want to use a wire brush that is so stiff it will put significant scratches in the aluminum. Thanks for the help so far!
Would brake cleaner and steel wool be ok? I don't want to use a wire brush that is so stiff it will put significant scratches in the aluminum. Thanks for the help so far!
#9
Supreme Member
iTrader: (4)
Join Date: Oct 1999
Location: GO PACK GO
Posts: 4,211
Likes: 0
Received 2 Likes
on
2 Posts
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
Re: Cleaning bare aluminum intake?
Aluminum mag cleaner and a nylon bristle brush. It'll clean it up.
EDIT: I mean the spray-on stuff, not the paste....
EDIT: I mean the spray-on stuff, not the paste....
Last edited by Confuzed1; 11-08-2008 at 07:48 PM.
#10
Senior Member
Join Date: Jul 2001
Location: Louisville Kentucky U.S.A.
Posts: 667
Likes: 0
Received 2 Likes
on
2 Posts
Car: 86 Iroc Z
Engine: 406
Transmission: 350 Turbo
Axle/Gears: 373
Re: Cleaning bare aluminum intake?
I will try the brake cleaner...didn't think of that. The intake is currently on the car, and 90% of it looks perfect (its only been on the car for a little over a year), so painting it probably isn't the best idea...we're talking faint spots, like coolant stains or something. There is no oxidation.
Would brake cleaner and steel wool be ok? I don't want to use a wire brush that is so stiff it will put significant scratches in the aluminum. Thanks for the help so far!
Would brake cleaner and steel wool be ok? I don't want to use a wire brush that is so stiff it will put significant scratches in the aluminum. Thanks for the help so far!
#11
Supreme Member
Join Date: Sep 2005
Location: Ottawa, ONT
Posts: 1,951
Likes: 0
Received 7 Likes
on
7 Posts
Car: 1987 Firebird
Engine: 355
Transmission: T56
Re: Cleaning bare aluminum intake?
Might be a lil late for this now, but the first thing i did to my intake was blast it with a few coats of clear coat when it was new. Let cure, and it likes to keep itself clean. Ive spilled my fair share of oil, and coolant on it, but it wont "soak" into the aluminum with a clear coat there. Hopefully it wont yellow on me, but we'll have to wait and see.
After a year, i just sprayed brake cleaner to get rid of dust, or any grease that had accumulated.
After a year, i just sprayed brake cleaner to get rid of dust, or any grease that had accumulated.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
mdtoren
Tech / General Engine
0
08-16-2015 05:45 PM