When I was talking to Dirk, I brought up the topic of ThirdGen.org merchandise and how every1 really wants it and he told me that he IS making them!!

YES thats correct, he told me to make this post and to say that the 1st things will most likely be shirts and stickers and he will see how that goes. Thanks every1!!

------------------
89 RS

STILL Looking For:
An 87 IROC-Z28 350 TPI

 

That´s great news man, I got to have a T-shirt and some some stickers to for my car

------------------
Z28 -87 TPI
white with T-roof
red interior with leather seats
Wagner Borg rear axel
all options
all stock
check Website for info.
www.musikhuset.org/~po/camaro

 

With all of my website stickers, I'm gonna start looking like a *****.

Dirk should make a thirdgen.org decal in japenese script.

------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah

 

YEEEAAAAAAA... i finally get to shut up about this topic and buy some stuff.

license plate frame....
in japanese. and then, every component ALL U guys have on thirdgen, so i can put stickers on mine.

score.

------------------
91 FireBird 305 V-8
Edelbrock Catback, Fourth Gen Console. i have six cupholders. all for starbucks!
ghetto rigged cold air intake,
GheTTo Riggers INC.
We Make Mcgyver look Like Crap
God Created The Earth, And Then Turned Up The Bass

Part Search, I NEED A Harness For A Radiator fan, THANX

 

let's see a sticker on my car, on my fridge, on my pc, on my monitor, on my locker at work, on my cooler, on my sebring(cause I hate it!), on my radio at work, then atleast 20 to slap on ricers at wal-mart in the parking lot. Hey will they stick to cat hair? I wanna put one on my cat Dexter. Oh well that's what the shirts are for. I'll take two larges and one XXXX-small.

------------------
Trans Am:
(Engine)305 TPI
180 Degree Thermostat
JET Fan Switch
TB Bypass
Accel 300+ 8.8 Racing Wires
Accel Super Coil
Bosch Platinium Plugs
Custom Ram Air with K&N
Removed Emissions Equipment & Cat.
(Stereo)Full Kenwood Excelon System
See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324
Member at kyfbodies.org

 

Hey Dirk you might wanna place a little fine print at the bottom of the order page for the stickers. That says "Thirdgen.org is not responsible for where their stickers get stuck".

------------------
Trans Am:
(Engine)305 TPI
180 Degree Thermostat
JET Fan Switch
TB Bypass
Accel 300+ 8.8 Racing Wires
Accel Super Coil
Bosch Platinium Plugs
Custom Ram Air with K&N
Removed Emissions Equipment & Cat.
(Stereo)Full Kenwood Excelon System
See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324
Member at kyfbodies.org

 

Anyone know how much power the stickers will add to our cars?

 

Put me on the list, I need the horsepower!

 

Scientific tests by top professionals have revealed increases of at least 15-20 horsepower!***

***note that all horsepower gains were reported only on stickered cars in which a complete tune-up was performed and custom exhaust simultaneously added.

 

i havent seen a better looking convertible on here than mr. irocz's i nominate him for the convertible spot.......

------------------
1991 RS LO3

some of my favorite quotes:

I do not blame stupid people for being stupid, what i do blame them for is for not asking smart people for advice. When ever my mom asks for help, i tell her, i'm the one who knows what he's doing, not you, don't question me, just do what i tell you to. if stupid people would just realize they were stupid, and consult a smart person for advice, before they went and did something stupid and got pregnant/got someone pregant, this ****hole of a world would be a lot better. - adam corola

Honda makes great performance cars - any scarcastic comedian

 

I'm not sticking stickers on my car. No offense, I love the site, but I am not defacing my black beauty. Stickers, bad idea. Leather Jackets with a thrid gen camaro and firebird on them that say THIRDGEN.ORG MEMEBER, I'll pay upwards 100 bucks for one.

 

If the sticker is no bigger that 3X3" and is not ugly, Id put it on my car.

 

On my toolbox, yes. On my car, no.

 

yah hooooooooooooo
sign me up scotty

------------------
"Work like you don't need the money, love like you've never been hurt, and dance like you do when nobody's watching."

 

oh and i suggest you put carndrvr's picture on the t-shirt....it is beautiful

------------------
"Work like you don't need the money, love like you've never been hurt, and dance like you do when nobody's watching."

 

i second that!

 

Not to burst the bubbles but it's already in the works. From talking to Dirk the design has already been completed. But good idea tho.

------------------
Trans Am:
(Engine)305 TPI
180 Degree Thermostat
JET Fan Switch
TB Bypass
Accel 300+ 8.8 Racing Wires
Accel Super Coil
Bosch Platinium Plugs
Custom Ram Air with K&N
Removed Emissions Equipment & Cat.
(Stereo)Full Kenwood Excelon System
See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324
Member at kyfbodies.org

[This message has been edited by jobryan26 (edited August 09, 2001).]

 

No more than 400 posts, geez, that cuts out alot. Lets just drop all the people with white camaros with non hertigate strips and everyone with red interior....


:| sarcasim

 

I agree with Jza and un4gvn. No stickers on my Black Beauty either but I would wear the leather jacket, tee shirt or hat proud. May consider the plate frame but I doubt it. The leather is the way to go for us non sticker people.

------------------
86 Camaro Black SS Coupe, T Tops, Flowmaster, Custom Paint, Dunlop Road Kings S/R tires, Wheel Country Directional Chrome Wheels,new charcoal & gray interior including seats and door panels, new carpet and headliner, complete front end suspension rebuild, new Valve seals, and more mods to come
http://www.angelfire.com/sports/niterider/86camaro.html
Morgan_Andre@hotmail.com

 

Its got to be a nice IROC-Z and a GTA.

------------------
89 RS

STILL Looking For:
An 87 IROC-Z28 350 TPI

 

Does he have any drawings or pictures of what the stickers are going to look like ?

------------------
1988 Sport Coupe 305 TBI
K&N
Flowmaster exhaust


Daily driver:
1988 K1500 5.7 4x4 shortbed flowmaster cat-back gutted cat.
AOL: RyanNH84

 

Not to my knowlege. A while back he said he had someone working on the design-logo. Then when I was talking to him in the chat about 1 week ago he said that he was going to do the t-shirts and stickers and then go from there. He just wants to see how they do first. I'm sure it'll be great.

------------------
Trans Am:
(Engine)305 TPI
180 Degree Thermostat
JET Fan Switch
TB Bypass
Accel 300+ 8.8 Racing Wires
Accel Super Coil
Bosch Platinium Plugs
Custom Ram Air with K&N
Removed Emissions Equipment & Cat.
(Stereo)Full Kenwood Excelon System
See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324
Member at kyfbodies.org

 

this post says may 2001.... Wheres my stuff.... lol,

------------------
91 FireBird 305 V-8
Edelbrock Catback, Custom Alarm. Fourth Gen Console. i have six cupholders. all for starbucks!
Go|)Created The Earth, And Then Turned Up The Bass.
Here's My Audio Install!

"Honda's FOR ME TO POOP ON!" -Triumph...

 

Hey what ever happened to that?

------------------
89 RS parts car
Daily driver 91 RS auto LO3 70k, 14x3 K&N Open element, cat-back delete, Richmond 3.42's, Zexel Torsion posi.
Coming soon: 350, headers, loudmouth exhaust, gutted cat.

 

Alright DIRK! That's going to be awesome! Can't wait. But don't make them TOO expensive

------------------
1984 Firebird SE
1985 Camaro z28 305 engine T-5 Five Speed Tranny, 92 Camaro Leather Seats Console, carpet everything. Soon to put in 700R4 and 427CI. (Hopefully.
To view my car go to:

http://geocities.com/jmboriss/bluecar.html

It is also for sale, please make me an offer. Thanks.

 

Yea kinda been awhile now(...tapping on desk)

------------------

See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324

 

LOL guys I know. He told me to make this post then to let every1 know the stuff was coming, he hasn't brought it up lately. I will talk to Dirk as soon as possible and get back to u guys.

------------------
89 RS
STILL Looking For:
An 87 IROC-Z28 350 TPI

Yeah I have an RS, but I want an IROC-Z!!

 

sweetness, count me in for a T Shirt and a sticker

 

I'm a girl-so I love shopping and spending money (ESPECIALLY on car related things)-count me in!

 

I want a sticker

------------------
*1989 RS
*Red, Daytona Turbo fiberglass hood, chrome 16x8 IROC wheels
*355 CID
*TPI ported plenum, SLP siamesed runners, Edelbrock high flow intake
*SLP 1 and 3/4 headers with 3 inch catback
*Richmond 3.73, Auburn Posi
*Modded 700-R4, 2800 stall converter
*eibach pro kit and hotchkis sturt tower brace

 

I talked to him guys and he sounds like he doesn't want to do it too much now, and hasn't done anything since this post was made, there might be a chance though.

He doesn't think he's going to make enough of a profit, and he needs some1 else to assist him and do all of the work kinda since he can't.

[This message has been edited by IROCZTWENTYGR8 (edited November 02, 2001).]

 

There u have it.

 

I didnt know it was about a profit. I was thinking if we could get like 100 stickers for like $500, and 100 people wanted them, then maybe you would charge like $6 each to cover shipping. And it would promote his awesome website. D-mn, everything these days are about money

------------------
*1989 RS
*Red, Daytona Turbo fiberglass hood, chrome 16x8 IROC wheels
*355 CID
*TPI ported plenum, SLP siamesed runners, Edelbrock high flow intake
*SLP 1 and 3/4 headers with 3 inch catback
*Richmond 3.73, Auburn Posi
*Modded 700-R4, 2800 stall converter
*eibach pro kit and hotchkis sturt tower brace

 

Somebody find somebody that wants to make money. Tell them to invest $300 for custom stickers and sell them on thirdgen. He's a busy man with an actual job, making $100 off some stickers isn't going to be worth the time spent running back and forth from the post office.
I'm all for this but I'm broke.

 

Yeah and he needs it because he is already losing money because of this site, he doesn't really need to lose more. It might not be worth the work. Having this site costs alot of $$. I don't think he wants to keep it much anymore either.

[This message has been edited by IROCZTWENTYGR8 (edited November 02, 2001).]

 

I agree guys But no news is good news!

------------------

See my Ride:
https://www.thirdgen.org/rides/index...ew&rideid=1324

 

What??

 

I know a screen printer that makes stickers for a living
But it's here in Australia I could probably convince him to make some if he makes a profit
but he'd probably want to be paid in advance
It'd be cheaper for you guys though since your dollar is worth twice ours

------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
Get ICQ Page My ICQ
ICQ # 18562788
------------------

1982 Z28 Camaro
305ci LG4, Muncie 4-Speed, Holley Carburettor (CFM Unknown), 2.5" Stainless steel exhaust all the way through.
Fibreglass hood.
Boston 4x6" CX7e 2-ways, 6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.

 

heh oh well, i went to a tech center place in a high school a few years back where we made stickers and shirts like that(i could do both) ill just run over there and ask my old instructor if he could have a few kids whip up some stickers and shirts for me that say thirdgen.org:can you dig it sucka

 

If u can do that stuff and the quality is good, why not assist Dirk in producing official merchandise, that would mean doing everything though since he can't.