The catch is that the bolt pattern isn't exactly right and I haven't checked if they even offer the right backspacing. They have a 120mm bolt circle and our cars run 120.65mm I don't know if it makes enought of a difference to need them to be machined or not. But they look cool Don't they?

------------------
-Tas
'89 Formula WS-6

305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options

[This message has been edited by Tas (edited December 02, 2001).]

 

Those are pretty nice wheels,who makes them?

 

I LIKE them! Different, but in a real cool way!


Ken

------------------
1986 IROC-Z Conv't
- ASCD SS Hood, White Gauges, 17x9.5 TT II rims w/275/40x17" F1s, 1.5" Jamex Lowering Springs, BMR stb, Lakewood APR, PST suspension parts, Edelbrock Trailing Arms, KYBs, Edelbrock RPM Cat-Back, Edelbrock JHC Headers, Edelbrock RPM Chrome Tips, Catco, World Products Heads, CompCam, SLP runners, Ported Plenum, K&N, Airfoil +polished/billet dress-up stuff
ChevyKen's Cars

Administrator @ ChevyWorld.net

 

get them, be different. Looks cool, see if someone can photoshop them for you before you buy them, they may not look right.

 

The difference in inches would be .0255" That would mean that each hole would have to be oversize at least .012"-.013" which means they will probably have to be enlarged. Do they use Acorn nuts or Shank nuts?? It should be pretty simple, though, since they are so close.

------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'


89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock

Bassett Racing

 

They are MAS Italy rims.

------------------
-Tas
'89 Formula WS-6

305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options

 

That's a BMW bolt pattern. I've always wondered if it would fit with that little a difference.

 

17x8.5s got pushed back to febuary. But good news is that they can do customd drilled pattern for our cars. yeay . I hope it won't be an arm and a leg

------------------
-Tas
'89 Formula WS-6

305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options