Body General body information and techniques for restoration, repairs, and modifications.

where to get clear side markers?

Thread Tools
 
Search this Thread
 
Old Aug 1, 2003 | 11:25 PM
  #1  
eektech909's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2003
Posts: 15
Likes: 0
where to get clear side markers?

anyone know where to get clear side markers for an 89 firebird?
Reply
Old Aug 2, 2003 | 07:48 AM
  #2  
87WS6's Avatar
Supreme Member
iTrader: (1)
 
Joined: Sep 2002
Posts: 2,565
Likes: 10
From: Texas
Car: 1992 Formula Firebird
Engine: 305CID (LB9)
Transmission: World Class T5
Axle/Gears: 10-bolt, 4.10 gears
Ebay and some other places on the web. Just search around. You'll find them.

Last edited by 87WS6; Aug 2, 2003 at 07:50 AM.
Reply
Old Aug 2, 2003 | 08:31 AM
  #3  
heavy_chevy29's Avatar
Supreme Member
 
Joined: Dec 2001
Posts: 1,854
Likes: 0
From: boonton, NJ
Car: 84 camaro Z28
Engine: 434sbc
Transmission: powerglide
Axle/Gears: moser 9" with 411 posi
i got mine from procarparts.com
Reply
Old Aug 2, 2003 | 11:42 AM
  #4  
Gambit69's Avatar
Senior Member
 
Joined: May 2001
Posts: 525
Likes: 0
From: Ames, Iowa, USA
Car: 1989 Pontiac Firebird Formula 350
Engine: 350 TPI
Transmission: 700r4
I got mine off of ebay from procarparts. I paid a little over $20 for them. Here are a few pics of them on my 89 Firebird Formula.




And here is a pic of my car with all my front lights on except headlights.



You can see more pics at my website.
http://www.cardomain.com/id/kitt350
Reply
Old Aug 2, 2003 | 02:43 PM
  #5  
Y2KFirehawk's Avatar
Senior Member
20 Year Member
 
Joined: Feb 2002
Posts: 830
Likes: 0
From: Lehigh Valley, PA
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
How hard is it to replace those clear sides? Do they just pop out? I ordered myself a pair and I was just wondering what's the best way to go about it?

I have a 1990 Camaro. Thanks!
Reply
Old Aug 2, 2003 | 04:12 PM
  #6  
Gambit69's Avatar
Senior Member
 
Joined: May 2001
Posts: 525
Likes: 0
From: Ames, Iowa, USA
Car: 1989 Pontiac Firebird Formula 350
Engine: 350 TPI
Transmission: 700r4
On mine, I pulled the air dam down so I could see inside the fender and there is 2 metal clips that lock the parts in place. Just flip the metal clips back and slip the clips out of the holes that they are sitting in and the marker lights just slip out. Just do things in reverse to put them back in. I had mine in and out with new bulbs put back in in about 15 minutes so it is not that hard at all. Hope this helps.
Reply
Old Aug 12, 2003 | 01:32 PM
  #7  
Zrated83's Avatar
Supreme Member
iTrader: (17)
 
Joined: Feb 2003
Posts: 2,182
Likes: 1
From: Buckley AFB, CO / Crestview, FL
Car: 83 Z-28
Engine: LG4
Transmission: 700R4
Axle/Gears: 02 WS6 Rear w/3:42
Hey heavychevy, did you have any problems putting yours in. I went to procarparts.com and found them but it says its only for 85-90 camaros.

Mike
Reply
Old Aug 12, 2003 | 05:47 PM
  #8  
camarogirl18's Avatar
Supreme Member
iTrader: (2)
 
Joined: Jan 2003
Posts: 1,857
Likes: 0
From: Maryland...DO I HAVE TO ADMIT TO THAT?!
Car: 1991 Chevy Camaro RS
Engine: 283
Transmission: 700r4 Auto
this is a dumb question....when u done the side markers in clear,did u do the very back ones in the brake unit & the front ones under the headlights in clear also??
Reply
Old Aug 13, 2003 | 06:05 AM
  #9  
Y2KFirehawk's Avatar
Senior Member
20 Year Member
 
Joined: Feb 2002
Posts: 830
Likes: 0
From: Lehigh Valley, PA
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
I have another somewhat of a silly question to add to that is do you guys replace the bulb in the side turn signal with a colored one? Or do you leave it white? I haven't replaced mine yet, they just came in the mail yesterday but I am curious.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
Omega
LSX and LTX Parts
0
Aug 26, 2015 06:40 AM
Fronzizzle
Electronics
3
Aug 17, 2015 02:52 PM
Tony Ferrarri
Electronics
1
Aug 11, 2015 07:59 PM
NBrehm
Exterior Parts for Sale
0
Aug 5, 2015 08:19 PM




All times are GMT -5. The time now is 03:08 PM.