Finding A Wonderbar?!
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 85
Likes: 0
From: Arizona
Car: 1983 Firebird SE
Engine: 5.0L V8
Transmission: TH700R4
Finding A Wonderbar?!
Hey everybody....
Well some of you might have heard of my problem with my steering gear box problem... It is making my body pannels creak and grind every time I turn my wheel. There was a decent sized crack in there for a while, but I had that welded up.
Unfortunately it is starting to crack again, and the problem persists. I keep reading about these "wonderbars" or steering gearbox supports that fix this problem that I am having. The only question is, where the hell do I find one? I have checked all my local parts stores such as AutoZone and Checkers, ect. ect. And even called Summit Racing with no results.
I was also wondering if subframe connectors will help it out any. It has been doing this ever since I bought the car 2 years ago, and I am looking to eliminate the problem completely and once and for all.
Any help or suggestions on where I might find one of these "wonderbars" would be greatly appriciated.
Thanks!
Well some of you might have heard of my problem with my steering gear box problem... It is making my body pannels creak and grind every time I turn my wheel. There was a decent sized crack in there for a while, but I had that welded up.
Unfortunately it is starting to crack again, and the problem persists. I keep reading about these "wonderbars" or steering gearbox supports that fix this problem that I am having. The only question is, where the hell do I find one? I have checked all my local parts stores such as AutoZone and Checkers, ect. ect. And even called Summit Racing with no results.
I was also wondering if subframe connectors will help it out any. It has been doing this ever since I bought the car 2 years ago, and I am looking to eliminate the problem completely and once and for all.
Any help or suggestions on where I might find one of these "wonderbars" would be greatly appriciated.
Thanks!
Supreme Member
Joined: May 2003
Posts: 1,995
Likes: 0
From: Toledo, OH
Car: 1992 Firebird
Engine: forged 357
Transmission: 700r4, 2200-2400 stall, vette servo
Axle/Gears: stock pegleg 2.73 drum (temp)
Supreme Member
iTrader: (1)
Joined: Jun 2001
Posts: 3,109
Likes: 25
From: Tacoma, Wa
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 85
Likes: 0
From: Arizona
Car: 1983 Firebird SE
Engine: 5.0L V8
Transmission: TH700R4
Hey guys, thanks a lot! They are quite a bit cheaper than I was expecting... Does anybody have any pictures of one installed. It sort of looks like a strut tower brace to me.... or does it mount on the subfame underneath?
Trending Topics
I see that you are in Arizona too.
I have a used one that needs to be repainted.
If you want it, either PM me, or email me at:
WarbirdTA@hotmail.com
for a price and/or shipping.
Hope this helps,
George
I have a used one that needs to be repainted.
If you want it, either PM me, or email me at:
WarbirdTA@hotmail.com
for a price and/or shipping.
Hope this helps,
George
Joined: Apr 2004
Posts: 3,001
Likes: 62
From: Salt Lake City, Utah
Car: 1988 camaro "SS"/ 1991 305/T5
Engine: 383 LT1 in progress/LT1TBI 355 soon
Transmission: Probuilt 700R4 3600 stall/ T5
Axle/Gears: Moser axles, 3.42 Eaton Posi
hell i went to dan`s junk yard here in kingman and i got my wonderbar off an 89 iroc for 10 bucks
.just check your local junkyards and look for an iroc or something.from what i`ve seen they came on them stock,you might get lucky.just trying to save you a few bucks.
.just check your local junkyards and look for an iroc or something.from what i`ve seen they came on them stock,you might get lucky.just trying to save you a few bucks.
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 85
Likes: 0
From: Arizona
Car: 1983 Firebird SE
Engine: 5.0L V8
Transmission: TH700R4
Hey thanks for the offers guys, but I went ahead and ordered one from Top-Down Solutions. Since I am going to be putting that on, I went out and also picked up some new swaybar bushings from Energy Suspention. I dont know how much of a difference they'll make, but mine are freakin shot, so I guess it couldnt hurt.
I will try to get some pictures when it comes and I get it all installed.
I will try to get some pictures when it comes and I get it all installed.
Supreme Member
iTrader: (1)
Joined: Jun 2001
Posts: 3,109
Likes: 25
From: Tacoma, Wa
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23
Originally posted by novadk13
my spohn, was real easy to install
my spohn, was real easy to install
Thread Starter
Junior Member
Joined: Feb 2003
Posts: 85
Likes: 0
From: Arizona
Car: 1983 Firebird SE
Engine: 5.0L V8
Transmission: TH700R4
Whats up all? The wonderbar came in the mail today! I am going over to a friends house tomorrow night to put it and my new swaybar bushings on. Hurray for friends who let you use their garage! (Apartment life sucks, lol) I will try to get some pictures of where i was getting stress cracks from the stearing box....
Thanks again everyone!
Thanks again everyone!
Thread
Thread Starter
Forum
Replies
Last Post
Breazlan
Engine/Drivetrain/Suspension Parts for Sale
1
Sep 25, 2015 11:20 AM
snakeshooter
Suspension and Chassis
11
Sep 10, 2015 07:46 AM
MikkoV
TPI
2
Sep 9, 2015 04:25 PM







