Body General body information and techniques for restoration, repairs, and modifications.

IROC Decal installation help

Thread Tools
 
Search this Thread
 
Old Feb 3, 2006 | 01:08 PM
  #1  
jsrailrd's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 3
Likes: 0
From: LaVerkin, Utah
Car: 88 IROC
Engine: 5.0 TPI, BORED, HYPER PISTONS, CAM
Transmission: auto
IROC Decal installation help

Does anyone know of or know where to find the factory spec for positioning the IROC decals on the doors. I have heard the rear of the door handle is the starting point but can't find a height measurement. Trying to finish a 2 Yr resto.
Reply
Old Feb 4, 2006 | 07:25 PM
  #2  
hotrodln's Avatar
Senior Member
20 Year Member
 
Joined: Feb 2005
Posts: 527
Likes: 5
From: Albany NY
Car: 84 Trans AM (sold), 87 IROC, 09 C6
Engine: Lt1 in IROC
Transmission: 5 speeds
Axle/Gears: Moser 12 bolt tru tracker 3.42
I don't know where you would find that info "writtten"....I would get a look at somebody ele's car ....if you need to take a measurement from that...........
Reply
Old Feb 4, 2006 | 07:53 PM
  #3  
82 Iron Duke's Avatar
Supreme Member
iTrader: (21)
 
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Re: IROC Decal installation help

Originally posted by jsrailrd
Does anyone know of or know where to find the factory spec for positioning the IROC decals on the doors. I have heard the rear of the door handle is the starting point but can't find a height measurement. Trying to finish a 2 Yr resto.
I have seen them at the front of the doors and the rear of the doors Maybe they are different from 85-87
Reply
Old Feb 4, 2006 | 10:32 PM
  #4  
MillerTime21's Avatar
Senior Member
 
Joined: Jan 2004
Posts: 564
Likes: 0
From: Lockport,IL
Car: 94 25th TA
Engine: 355LT1
Transmission: T-56
Axle/Gears: 10bolt 3.42
Re: Re: IROC Decal installation help

Originally posted by 82 Iron Duke
I have seen them at the front of the doors and the rear of the doors Maybe they are different from 85-87
Not positive but I was told if the decal was on the front of the door it has a 305 and if its on the back of the door it has a 350.
Reply
Old Feb 4, 2006 | 10:57 PM
  #5  
87CIZ's Avatar
Supreme Member
20 Year Member
iTrader: (8)
 
Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
if it's on the front of the door it's 85-87 if it's on the rear of the door it's 88-90 i'll look and see if i can find the information again, but it was written somewhere where to start the decal .
Reply
Old Feb 4, 2006 | 11:01 PM
  #6  
82 Iron Duke's Avatar
Supreme Member
iTrader: (21)
 
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
That makes sense
Reply
Old Feb 5, 2006 | 10:14 AM
  #7  
MillerTime21's Avatar
Senior Member
 
Joined: Jan 2004
Posts: 564
Likes: 0
From: Lockport,IL
Car: 94 25th TA
Engine: 355LT1
Transmission: T-56
Axle/Gears: 10bolt 3.42
Originally posted by 87CIZ
if it's on the front of the door it's 85-87 if it's on the rear of the door it's 88-90 i'll look and see if i can find the information again, but it was written somewhere where to start the decal .
When I bought my 88 Iroc-z I'm almost positive it had the original paint and decals still on it and the sticker was on the front of the door????
Reply
Old Feb 5, 2006 | 03:42 PM
  #8  
87CIZ's Avatar
Supreme Member
20 Year Member
iTrader: (8)
 
Joined: Apr 2002
Posts: 2,029
Likes: 2
From: Ohio
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
alright found them for 85-87

For 1985 - 1987, the correct dimensions are:

Driver's
Horizontal: 6-3/8" from the front leading edge of the door to the lower left corner of the "I".
Vertical: 2-5/8" from the rocker molding to the same corner of the "I".

Passenger's
The same dimensions apply but to the lower right corner of the "Z".


I still have to find them for the 88-90
Reply
Old Feb 7, 2006 | 06:57 PM
  #9  
net_coma's Avatar
Member
iTrader: (3)
 
Joined: Jun 2005
Posts: 472
Likes: 0
From: Ft. Worth
I can measure my 88, tomorrow when there is some light.
Reply
Old Feb 8, 2006 | 11:04 AM
  #10  
ringo234's Avatar
Supreme Member
 
Joined: Feb 2004
Posts: 1,581
Likes: 3
From: So Cal
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Originally posted by MillerTime21
When I bought my 88 Iroc-z I'm almost positive it had the original paint and decals still on it and the sticker was on the front of the door????
My 89 has the sticker on the rear, if this helps, and it's original paint.
Reply
Old Feb 8, 2006 | 12:42 PM
  #11  
jsrailrd's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 3
Likes: 0
From: LaVerkin, Utah
Car: 88 IROC
Engine: 5.0 TPI, BORED, HYPER PISTONS, CAM
Transmission: auto
From what I've read, 88 - 90 were all on the rear of the door. I really do appreciate everyones input, Thanks
Reply
Old Feb 8, 2006 | 08:46 PM
  #12  
tom3's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2004
Posts: 2,322
Likes: 100
From: So. Ohio
Car: 88 Camaro
Engine: L98 350
Transmission: 700r4
Measured the decals on my 88 at the rear of the door, four inches from the rear of the door to the bottom corner of the decal, 5 7/8" to the bottom of the decal to the bottom of the door to the bottom edge of the plastic cladding. Might have been 6 inches to the bottom of the steel door? Hope this helps.
Attached Thumbnails IROC Decal installation help-montana036a.jpg  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
Derick15
Tech / General Engine
2
Sep 17, 2016 05:28 PM
kyleb24
Camaros for Sale
2
Aug 15, 2015 08:24 AM
mustangman65_79
Body
14
Aug 12, 2015 06:39 AM
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM




All times are GMT -5. The time now is 02:03 AM.