wide body kit on a 3rd gen?
Thread Starter
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
wide body kit on a 3rd gen?
ne1 ever seen a 3rd gen with a wide body kit? got ne pix? plz post thankx
Senior Member
iTrader: (4)
Joined: Sep 2003
Posts: 900
Likes: 0
From: N. CA
Car: '85 TA
Engine: Aluminum Fuelie
Transmission: Mother of All Manuals
plz uz teh srch on teh boardz... therz woot thredz wit kitz. 
There are no widebody kits available that I know of. The closest that you could come to one was the Evoluzione series of kit cars, but they have been discontinued and are no longer available.

There are no widebody kits available that I know of. The closest that you could come to one was the Evoluzione series of kit cars, but they have been discontinued and are no longer available.
Senior Member
iTrader: (4)
Joined: Sep 2003
Posts: 900
Likes: 0
From: N. CA
Car: '85 TA
Engine: Aluminum Fuelie
Transmission: Mother of All Manuals
Duke, he/she just asked if there was one available. Everybody has their own taste, so let's try not muddy up this thread with arguments on what one can/can't do to his car.
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Did you read the previous post about NO WIDE BODY KITS AVAILABLE? He can put a KIA grille if he wants to, there are NONE AVAILABLE because they are UGLY!
Junior Member
Joined: Feb 2006
Posts: 68
Likes: 0
From: New York City
Car: 1985 Camaro
Engine: 2.8L V6
Transmission: T5
Why the open hostility? Best just answer the question -A simple "No" would suffice- and leave. In my short time here I've seen more open flaming here than I have almost everywhere else.
Trending Topics
Supreme Member
iTrader: (21)
Joined: Dec 2005
Posts: 4,075
Likes: 1
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Originally Posted by joshnryandad1
i was just wondering but is there members here that only look through all of the posts to tell someone to do a search?

----------
Originally Posted by Kyuusei
Why the open hostility? Best just answer the question -A simple "No" would suffice- and leave. In my short time here I've seen more open flaming here than I have almost everywhere else.
Last edited by 82 Iron Duke; May 22, 2006 at 11:37 PM. Reason: Automerged Doublepost
Senior Member
iTrader: (3)
Joined: Jan 2005
Posts: 517
Likes: 0
From: San Angelo, TX
Car: 1988 Pontiac firebird
Engine: '93 LT1
Transmission: Built 700R4
Axle/Gears: 3.70 9 bolt
i have seen one wide body kit on TGO before.....i don't know where it is, but there was one. and it wasn't the evoluzione
Senior Member
iTrader: (3)
Joined: Jan 2005
Posts: 517
Likes: 0
From: San Angelo, TX
Car: 1988 Pontiac firebird
Engine: '93 LT1
Transmission: Built 700R4
Axle/Gears: 3.70 9 bolt
Supreme Member

Joined: Nov 2004
Posts: 1,347
Likes: 0
From: Connecticut
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
go on ebay there is a guy that sells a widebody kit. it blends in with the quaters and fenders
Junior Member
Joined: Nov 2005
Posts: 49
Likes: 0
From: Dayton, Ohio
Car: 89 RS Camaro, Metallic Blue
Engine: 2.8 V6 (The 350's comin)
Transmission: 700R4
actually there is a wide body kit for third gens...ill try to find a link
*edit*
here ya go, really and im kinda ashamed 2 say this...it doesnt look TOO bad.
http://www.americansportscardesigns....n_camaro.shtml
*edit*
here ya go, really and im kinda ashamed 2 say this...it doesnt look TOO bad.
http://www.americansportscardesigns....n_camaro.shtml
Last edited by mknab; May 23, 2006 at 08:31 PM.
Thread Starter
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
not lookin at it i dont know about it its kinda ugly
eBay Motors: 82-92 CAMARO WIDE-BODY FENDER KIT RS Z28 BERLINETTA (item 8067809737 end time May-26-06 11:51:07 PDT)
eBay Motors: 82-92 CAMARO WIDE-BODY FENDER KIT RS Z28 BERLINETTA (item 8067809737 end time May-26-06 11:51:07 PDT)
Supreme Member
Joined: Apr 2006
Posts: 1,206
Likes: 4
From: Morganton, NC
Car: '92 T/A WS6 Vert/1956 Chevy Nomad
Engine: 350 TPI
Transmission: 700r4 w/ Transgo Kit
Axle/Gears: 3.42 LSD
I don't know why everybody is SO ADAMANT about people not moding their cars on here. They react like somebody just made a joke about their momma.
Personally (and I know this isn't really the place for personal opinion ... but), I welcome mods. I like MY cars all original 'cause that's what will bring the money down the road, and the more cars that are destroyed by ugly mods that nobody would want after they're done with them ... then the more rare my car will be and the more it will be worth.
So, I say let them ugly up their cars and I'll reep the benefits.
Personally (and I know this isn't really the place for personal opinion ... but), I welcome mods. I like MY cars all original 'cause that's what will bring the money down the road, and the more cars that are destroyed by ugly mods that nobody would want after they're done with them ... then the more rare my car will be and the more it will be worth.
So, I say let them ugly up their cars and I'll reep the benefits.
Senior Member
iTrader: (2)
Joined: Feb 2006
Posts: 619
Likes: 0
From: Wilmington,NC
Car: 87 trans am
Engine: 305
Transmission: T5
Axle/Gears: 3.42 SLP rear
People have different tastes, but really... These cars are wide as it is.
But an IMSA look would be cool for a track car.
But an IMSA look would be cool for a track car.
Supreme Member
iTrader: (1)
Joined: Jun 2002
Posts: 2,259
Likes: 0
From: Woodstock, GA
Car: 1987 Trans Am
Motion Performance made one in the early 80s, and I'm pretty sure its still available. I found an 84 TA with a widebody kit on it at Pull-A-Part about two years ago that actually looked nice...it had fiberglass front fenders and quarters with a subtle bulge, along with a rocker ground effect piece to join them. The back edge of the fender lip and the front edge of the quarter had the 2nd gen TA style GFX pieces molded in. I spent about three hours removing the kit (unbolting the front, cutting and banging on the original steel quarters), and still have it. I paid about $120 for it. It looks like the Motion kit, but more subtle. I'll use it eventually, probably on a convertible with messed up quarters.
Joined: Nov 2002
Posts: 3,466
Likes: 5
From: MA, USA
Car: 83 bird
Engine: 305/383
Transmission: WC T5
Axle/Gears: 3:42
I posted pix of an orange Pontiac 3rd gen with a widebody kit a while back... lemme see if I can find the post...
Here it is: https://www.thirdgen.org/forums/body...d-spotted.html
Here it is: https://www.thirdgen.org/forums/body...d-spotted.html
Member
Joined: Sep 2009
Posts: 107
Likes: 0
From: Aguadilla
Car: Camaro Z28 84' 350
Engine: 350 w. Holley 750
Transmission: Sadly still Automatic
Re: wide body kit on a 3rd gen?
Last edited by PPR787; Feb 24, 2010 at 11:30 PM.
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: wide body kit on a 3rd gen?
talk about stupid bringing up a thred that is about 4 years old
Member
Joined: Sep 2009
Posts: 107
Likes: 0
From: Aguadilla
Car: Camaro Z28 84' 350
Engine: 350 w. Holley 750
Transmission: Sadly still Automatic
Re: wide body kit on a 3rd gen?
thats not being stupid. i am using the search first to try to save other people time and work before i ask a question
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Member
Joined: Sep 2009
Posts: 107
Likes: 0
From: Aguadilla
Car: Camaro Z28 84' 350
Engine: 350 w. Holley 750
Transmission: Sadly still Automatic
Re: wide body kit on a 3rd gen?
hehe sorry but when i see such closedminded people i cant help myself and speak out loud what i think.
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Junior Member
Joined: Apr 2012
Posts: 9
Likes: 0
From: Los Fresnos, TX
Car: 1984 Pontiac Trans Am
Engine: 305; 5.0 H.O. (for now)
Transmission: Automatic..unfortunately :/
Re: wide body kit on a 3rd gen?
Check this Bad TA out...once I'm rollin in the dough in the medical field..my car is gonna be sumthin like this..
http://www.stealthtdi.com/TransAm.jpg
http://www.stealthtdi.com/TransAm.jpg
Last edited by 88txiroc; Apr 26, 2012 at 11:32 PM.
Junior Member
Joined: Apr 2012
Posts: 9
Likes: 0
From: Los Fresnos, TX
Car: 1984 Pontiac Trans Am
Engine: 305; 5.0 H.O. (for now)
Transmission: Automatic..unfortunately :/
Re: wide body kit on a 3rd gen?
Once a Trans Am surpasses a certain level of AMAZING..proper language is no longer adequate in the process of providing a description
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM
1992 Trans Am
Exterior Parts for Sale
5
Apr 4, 2016 12:50 PM
mdtoren
Tech / General Engine
0
Aug 16, 2015 05:45 PM




before the post 

