Body General body information and techniques for restoration, repairs, and modifications.

Need Info on the 84 Aerokits

Thread Tools
 
Search this Thread
 
Old Sep 5, 2008 | 01:23 PM
  #1  
Dark Knight Cus's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2008
Posts: 4
Likes: 0
Need Info on the 84 Aerokits

Hi there folks.. Was just wondering if anyone knows any info on the Aerokits that were available 84 onwards, but first appeared on the 83 Daytona pace car. I'm trying to find out if anyone still reproduces them either with the original crappy ABS plastic or the newer better Fibreglass. I've currently got one on my 83, Recaro Edition below.

Would much appreciate any help on this matter.. Thanks

Shaz
Dark Knight Customs, Uk
Attached Thumbnails Need Info on the 84 Aerokits-dark-knight-kitt-banner.jpg  

Last edited by Dark Knight Cus; Sep 5, 2008 at 01:27 PM. Reason: bold text
Reply
Old Sep 5, 2008 | 02:16 PM
  #2  
Thirdgen89GTA's Avatar
Supreme Member
20 Year Member
Liked
iTrader: (5)
 
Joined: Sep 2004
Posts: 5,906
Likes: 240
From: Chicagoland Suburbs
Car: 1989 Trans Am GTA
Engine: LT1, AFR 195cc, 231/239 LE cam.
Transmission: M28 T56
Axle/Gears: 3.23 10bolt waiting to explode.
Re: Need Info on the 84 Aerokits

They aren't really anything more than the standard GFX package that became standard on all 85-90 TAs.

There are cosmetic differences, but from a functional standpoint they are the same. The 85-90 TAs lost the bumperettes, and had a few other changes but i'm not an expert on the differences.
Reply
Old Sep 5, 2008 | 02:44 PM
  #3  
Dark Knight Cus's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2008
Posts: 4
Likes: 0
Re: Need Info on the 84 Aerokits

Do you think there is much demand for these 84 Aero body kits to be brought back.. In a way i'm kinda answering my own question and I suppose the only way I'm gonna know is If I'm selling them, I suppose.. What do you think??
Reply
Old Sep 5, 2008 | 02:51 PM
  #4  
Thirdgen89GTA's Avatar
Supreme Member
20 Year Member
Liked
iTrader: (5)
 
Joined: Sep 2004
Posts: 5,906
Likes: 240
From: Chicagoland Suburbs
Car: 1989 Trans Am GTA
Engine: LT1, AFR 195cc, 231/239 LE cam.
Transmission: M28 T56
Axle/Gears: 3.23 10bolt waiting to explode.
Re: Need Info on the 84 Aerokits

They are indeed scarce because they were only produced for a few years, and as an option. However with the inclusion as standard on all the 85-90s they really aren't that high in demand as they don't look significantly different, unlike the 91-92 body style which really change the look of the car.
Reply
Old Sep 5, 2008 | 03:45 PM
  #5  
TAdan's Avatar
Supreme Member
 
Joined: Jun 2000
Posts: 1,300
Likes: 1
From: NJ,USA
Car: 1984 Trans Am
Engine: GMPP 350 V8
Transmission: 700R4
Axle/Gears: 3.23
Re: Need Info on the 84 Aerokits

As far as each individual piece is concerned there is no relation between the 1985-90 W62 Aeropackage.


The Front lower chin spolier, the rockers, doors, and rear pieces are all different.

I have seen a few of the pieces advertised by some of the companies that make fiberglass body panels for drag-cars. VFN makes a set, but I do not know how close it is to the original. As far as I know the parts have never been reproduced in OEM style.

Come check out the 82-84 Firebird zone, we can answer your questions.

Last edited by TAdan; Sep 5, 2008 at 03:50 PM.
Reply
Old Sep 6, 2008 | 12:41 PM
  #6  
Dark Knight Cus's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2008
Posts: 4
Likes: 0
Re: Need Info on the 84 Aerokits

Originally Posted by Thirdgen89GTA
They are indeed scarce because they were only produced for a few years, and as an option. However with the inclusion as standard on all the 85-90s they really aren't that high in demand as they don't look significantly different, unlike the 91-92 body style which really change the look of the car.
Thanks for the info man.. I'm currently fabricating the 84 Aero kits including the front Nose cone and Rear Bumpers, but only on a made to order basis.. I'm going to post a new thread later today and to see if I can generate some interest. Thanks again.
Reply
Old Sep 6, 2008 | 12:50 PM
  #7  
Dark Knight Cus's Avatar
Thread Starter
Junior Member
 
Joined: Sep 2008
Posts: 4
Likes: 0
Re: Need Info on the 84 Aerokits

Originally Posted by TAdan
As far as each individual piece is concerned there is no relation between the 1985-90 W62 Aeropackage.


The Front lower chin spolier, the rockers, doors, and rear pieces are all different.

I have seen a few of the pieces advertised by some of the companies that make fiberglass body panels for drag-cars. VFN makes a set, but I do not know how close it is to the original. As far as I know the parts have never been reproduced in OEM style.

Come check out the 82-84 Firebird zone, we can answer your questions.
Kool.. I'll come and have a look in the Firebird Zone.

I ' m currently having the 83/84 Aerokits fabricated in the OEM style but on a made to order basis.. but first trying to see if i can generate enough interest in order to make it worth my while. I'll be posting a new thread later today
Reply
Old Sep 10, 2008 | 10:59 AM
  #8  
omnipotentgoku's Avatar
TGO Supporter
iTrader: (1)
 
Joined: May 2002
Posts: 2,480
Likes: 2
From: El Paso, Texas
Car: 1987 IROC Z
Engine: 350 TPI L98 block
Transmission: 700R4
Re: Need Info on the 84 Aerokits

A bit off topic, but I never thought i'd see one of those again. I personally took these pics of a "Dark knight" Camaro at a car show a few years ago. It looked interesting at best and I assumed it came from a single dealer.

http://www.omnipotent-goku.com/iroc/gallery/album46

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fanatic1074
Tech / General Engine
45
Oct 3, 2022 05:57 AM
3rdgenparts
Engine/Drivetrain/Suspension Parts for Sale
6
May 21, 2016 11:50 PM
oil pan 4
Fabrication
2
Oct 6, 2015 11:56 AM
bjpotter
History / Originality
17
Oct 4, 2015 07:48 PM
Linson
Auto Detailing and Appearance
12
Oct 1, 2015 09:50 PM




All times are GMT -5. The time now is 04:27 PM.