irocnroll89

iTrader: (4)

what years did the door get cup holders? I think it was only the 91 92 firebirds.? also was this assy actually a cup holder or a map holder with a cup like area at the front.? How well does it hold a drink?? Pics of these installed would be greatly appreciated, as i am considering getting a pair for my car. thnx again THE SHAGGY IROC

------------------
'89 SHAGGY IROC
L98 7r4, all free stuff,T.E.S.,HOOKER CAT BACK,KYB,ACCEL8.8,JET fan sw. etc.
so much to do , so little money

Red Demon

Seriously.. Why would you want them.. Just out of curiosity... If it were me I'd definately want my car original as much as possible. (which leaves a perfect interior) the only thing I'm going to change is the engine.. any way.. It definately wasn't the 91-92 camaro.. I wonder what goes on in the ways of the tranny

------------------
Hey feel free to chat with me on AOL IM if you wanna.. Darkhal2000!
My site, <A HREF="http://www.demoncamaro.net
should" TARGET=_blank>www.demoncamaro.net
should</A> be up shortly.

AmorgetRS

iTrader: (6)

They came in 90-92 Firebirds only. They are kinda cheesy plastic things, not worth it.

As for why, well, some people do like cup holders and don't give a rats *** about originality. I sure as heck don't care what came stock with the car and never will... just my .02

Drew

iTrader: (58)

They're on the 90-92 firebirds, that parts correct. They're very heavy duty plastic with heavy bolts that mount securely to the door not really cheesy at all. They'll hold up to a 44oz drink with no problems whatsoever... the only real problem with them is that they tend to get scuffed when getting in and out of the car since they stick out a bit.

------------------
Drew
The lone Thirdgenner of the Apocalypse
predatorman@hotmail.com
My Website
87 Iroc
91 Formula 14.3@98mph
91 RS Convertible
91 Firebird V6
92 S10
98 Grand Am GT

fearthista

I wouldnt get one I have had my car 7 years.I replace 2 or 3 every year,tring to keep it original.At 25.00 a pop its expensive.GM REALLY fubarred this idea up.

------------------
1991 GTA Trans AM 5.7L with 226,000 original miles on original motor,no LEAKS and running STRONG

MrJ

nothing at all wrong with the cupholders.. they are hardly cheesy. They are found in all 90-92 Firebirds with power windows. Unless you are careless and blind, you won't scuff them, let alone break them.

------------------
91 Trans Am WS6
Bright White
5.0 TPI auto
Flowmaster 3" 2 chamber catback
Trans Go shiftkit
2000 stall converter

Built on Wednesday

FiReBReTHa

harsh words, their not cheap, they withstand, and they work nice, i know performance vehicles shouldnt have cup holders, but then again, why are vettes automatic?
Lookin ebay, type 92 firebird, check old auctions if u must, but theyre there,

------------------
91 FireBird 305 V-8
no true mods,
ghetto rigged cold air intake,
People dont have a soul, its just something parents made up to frighten little children, like the boogie man, or micheal jackson..."

GheTTo Riggers INC.
We Make Mcgyver look Like Crap

lonsal

iTrader: (2)

I don't know why you are having such bad luck with your cupholder/map pockets. I have gotten a couple of scuffs on mine, but I think it can be cleaned up with a little effort. Good news for those of you Camaro or Firebird owners that want to add them. The mounting holes (actually they are square) are already in the inner door panel. You just need to buy the white plastic inserts that push into those holes at the "Help" section of Auto Parts store, or use a J-clip like I did. $25 is pretty cheap. I paid nearly $45 at my local Dealer each. I love them.

dacuma

Drew,
do you know how many screws hold the cupholders in place? and most importantly what size are they?

Oh by the way if anyone needs the part numbers here they are I got this price quote from www.gmparts.com
Here is the price quote you requested!
List Your
Part Number Description Price Price
10125158 map pocket RH 30.50 25.93 - 0 in stock,
can order
10125159 map pocket LH 30.50 25.93 - 0 in stock,
can order10125157 is a manufacturers casting number, changed to 10125158 /
10125159

lonsal

iTrader: (2)

There are 3 screws. Sorry I don't know the correct size. I mounted mine using J-clips rather than the off-white plastic inserts. I just want to remind everyone there is a plastic plug that needs to be ordered as well. It snaps in place and covers the upper screw. Good luck, Lon,

Pino91Formula

They also tend to break away from the door iv reglued them twice allready , if you ask me they are cheezey