i just picked up some 93 camaro seats the other day. for those of you have installed 4th gen seats, what did you do with the seat belt guides? how did you get the old guides off the belts, or did you just screw the old guides into the new seats? for the rear guides, did you take them off or leave them on?

[This message has been edited by Diabolical (edited November 10, 2001).]

 

I took the old ones off and screwed them in... I tried taking the belt off at the bottom by the door but I couldn't get that stupid torx screw out!!! I did the same to the back ones since they are the same color and size and all.

------------------
'91 Camaro RS 3.1L V6
4th Gen Seats, Sony Xplod CD Player, DJ Sexay's Kicks Panels with a Polk Audio 6½" Comp Set, 2 RF Punch 12's, RF Punch Amp 100.2, Coustic 360W Amp.
Soon to come, New Rims, New Rear Tires, Paint Job, Interior Color Change.


http://www.geocities.com/adidaspredator21/index.html
**BUT FIRST... gotta fix this... stupid people..**

 

do your front seat belts retract at the top and on the sides, or just the top?

 

top and sides... i just unscrewed it from the seat and screwed it into the 4th gen seats when i bolted them in

 

the junkyard i went to didnt let me take the guides, just the seats i guess a lot of junkyards do it like that cuz they sell the belts and whatna as a unit..Diabolical what part of CT u from?

------------------
1982 black Z-28:
-350 ci w/edelbrock 600cfm
-T5 Tranny
-4.11 rear end
-Blue Racer performance cam
-Dynomax headers

 

western ct, in the danbury area, how about you? what junkyards do you go to? i got my seats at chuck and eddies in southington

[This message has been edited by Diabolical (edited November 11, 2001).]

 

Hey I got my 4th gen seats from chuck and eddie's too.

------------------
84 Firebird
300HP GM Crate Motor, Eibach, Hotchkis, 3.73's Best Time so far 14.06 @ 98mph

 

I might have guides you can have if you pay shipping. My 4th gen seats have guides, but i have a vert so they aren't used. I can give them to you as soon as I figure out what to put over the hole that will be left.

------------------
Jeremy
91 rs, convertible, K&N, Edelbrock open element cleaner, 3.73, B&M mega-shifter, goodmark cowl-induction hood,tinted windows,MacEwen Overlays
4th gen seats, SS Chrome wheels, check out my ride at www.racecamaro.cz28.com or check out the reader's rides at: https://www.thirdgen.org/rides/index...ew&rideid=1217

 

im from Enfield i go to Levielles in Somers or Plaza Auto in Enfield, PLaza is great cuz theyhave at least a dozen and a half 3rd gens and like 5 4th gens.Frank where u from?

------------------
1982 black Z-28:
-350 ci w/edelbrock 600cfm
-T5 Tranny
-4.11 rear end
-Blue Racer performance cam
-Dynomax headers

 

the back belt brackets un bolt and bolt back on to the forth gen back seat back rest, the front belt guides I broke on the thirgen seats, and havent put the 4th gen front seat belt guides back on yet.

------------------
1991 Z-28 350 TPI, 700r4 with B&M shiftkit, 2400 stall, B&M Console Megashifter, 4th gen power seats, MSD6A, Blaster2 Coil, Holley 58mm TB, Ram-air, MSD 8.5 super conductor wires, Flowmaster catback, Crane rollers, march pulleys, and all free mods. (Currently in body shop getting fresh paint!!) I miss her! =(

 

my rear seats don't have shoulder belts, only waist

 

JM,
What color are you're guides and how would they look w/ 3rd gen seats? I'm missing mine all together.

------------------
85T/A 305/QJ work in progress.