Which hood should I go with. 91' camaro
#1
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Which hood should I go with. 91' camaro
Found this hood on the internet and thought this would be bad ***! What are some thoughts on this hood verses what I've got now.
Here's my car with 4" cowl. Not sure if I want to go with this or not. It's still a work in progress (10 yrs lol) I'd be painting it to match the body also.
#2
Member
Join Date: May 2014
Location: Wichita Kansas
Posts: 340
Likes: 0
Received 1 Like
on
1 Post
Car: 92 RS
Engine: LT1
Transmission: 700r4
Axle/Gears: 3.73
Re: Which hood should I go with. 91' camaro
I've personally never been fond of the 4" cowls on these cars or any for that matter. I like the new ZL1 hood. The louvers would take in a lot of water in the rain, I would think.
#3
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Which hood should I go with. 91' camaro
Thanks for commenting!
I kind of agree with you on the 4" cowl. But I do need at least a 2" cowl because my intake and carb stick out past the fenders. I wonder if the louvers are actually functional on that zl1 hood. Either way in my opinion it's gotta be one if the best hoods I've seen.
I kind of agree with you on the 4" cowl. But I do need at least a 2" cowl because my intake and carb stick out past the fenders. I wonder if the louvers are actually functional on that zl1 hood. Either way in my opinion it's gotta be one if the best hoods I've seen.
#4
Member
Join Date: May 2014
Location: Wichita Kansas
Posts: 340
Likes: 0
Received 1 Like
on
1 Post
Car: 92 RS
Engine: LT1
Transmission: 700r4
Axle/Gears: 3.73
Re: Which hood should I go with. 91' camaro
Ya I haven't looked into them really but I like them. If they are like mine it just depended on where you got them. I have seen a bunch like mine that aren't functional. There is something about a nonfunctional hood scoop or cowl that bugs me, so I had to go with a functional one.
#5
Junior Member
Join Date: Aug 2014
Location: Kiel, WI
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro RS
Engine: LT1 w/ 70mm Turbo
Transmission: Stage 3 TR6060
Axle/Gears: 4:10
Re: Which hood should I go with. 91' camaro
I plan on using the ZL1 hood also. Just wish I could find more pics from different angles. Emailed Duraflex and they didn't even have any other pics.
#6
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Which hood should I go with. 91' camaro
Thats kind of goofy the company wouldn't have more pics... I guess we'll have to see if anyone here has one on their car. I think they look awesome!! I'd have to sell my hood to put towards the zl1 hood. Where did you find the pic you saw of it?
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Which hood should I go with. 91' camaro
Ok nice. Do you know if the cowl is functional and if the louvers are as well?
#9
Junior Member
Join Date: Aug 2014
Location: Kiel, WI
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro RS
Engine: LT1 w/ 70mm Turbo
Transmission: Stage 3 TR6060
Axle/Gears: 4:10
Re: Which hood should I go with. 91' camaro
Sorry, I don't. They didn't give me any information hardly at all. I wanted to know if the underside was finished but they couldn't even answer that. I believe it is because I did a search on Google images and they show some 4th gen with it on. I assume it would be the same for the 3rd gens.
#10
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Which hood should I go with. 91' camaro
Oh ok yeah I would hope so. When do you plan on getting that hood?
#11
Junior Member
Join Date: Aug 2014
Location: Kiel, WI
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro RS
Engine: LT1 w/ 70mm Turbo
Transmission: Stage 3 TR6060
Axle/Gears: 4:10
Re: Which hood should I go with. 91' camaro
Probably going to be winter some time. They did say they thought it was a 3"high scoop though. Lol. I figured if I couldn't find someone else who has it, I'll probably be the guinea pig with see how it fits.
I have way too much to get done before the hood. Hope to have it back on the road in a few weeks again. Can't wait to drive it again!
I have way too much to get done before the hood. Hope to have it back on the road in a few weeks again. Can't wait to drive it again!
#12
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Which hood should I go with. 91' camaro
Oh ok that would work for me(3") I'd be interested to know how it fits and all when you get. I won't be ready for the hood prob till next year. I have to build a garage first and finish up the belt drive system and cooling system along with some other stuff.
#14
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Which hood should I go with. 91' camaro
hey just wondering if anyone ever bought one of these duraflex zl1 hoods? I'd like to know how they fit and if they need lots of body work to look good. I bought their 3 piece 5" tall spoiler and it needed a lot of work to fit and be ready for paint. All finished it looks awesome!! Any input would be nice. Thanks!
#16
Supreme Member
iTrader: (15)
Re: Which hood should I go with. 91' camaro
It looks like the Louvers are not functional but you could probably cut them open to make them so. Although, to really make them functional you would need to make a scoop that attached to the back of the radiator to make air flow through the radiator and then dammed upwards and out the louvers. It would be neat and doable but that hood would look awful with my heritage style stripes on it and it doesn't look like it's styling lends it well to a striped look.
https://www.ebay.com/itm/1982-1992-C...1Z-je5&vxp=mtr
https://www.ebay.com/itm/1982-1992-C...1Z-je5&vxp=mtr
#17
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Which hood should I go with. 91' camaro
The picture on the website sucks, but this is the best hood on the market (in my eyes)
https://www.cervinis.com/82-92camaro-cowl-hood.html
Its what I have on my camaro.
https://www.cervinis.com/82-92camaro-cowl-hood.html
Its what I have on my camaro.
#18
Junior Member
Thread Starter
Join Date: Aug 2014
Location: Mn
Posts: 64
Received 0 Likes
on
0 Posts
Car: 91' camaro rs
Engine: Sbc 327
Transmission: T-5
Axle/Gears: Stock 10 bolt w/posi 3.90 gears
Re: Which hood should I go with. 91' camaro
Keep the comments and info coming!
Thread
Thread Starter
Forum
Replies
Last Post
Black89TA
Exterior Parts for Sale
9
07-23-2016 10:42 AM
sailtexas186548
Exterior Parts for Sale
14
02-29-2016 08:40 AM