Replacement fog lights
Thread Starter
Supreme Member

Joined: Oct 2003
Posts: 1,083
Likes: 4
From: DFW
Car: 1992 Z28
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: G80 3.23
Replacement fog lights
Does anyone know of a good product to replace the factory fog lights with? If you have done, do you have any pictures
Joined: Jun 2006
Posts: 1,699
Likes: 17
From: Southern California
Car: 1987 Camaro LT
Engine: LG4 w/ SLP headers & a 3" catback
Transmission: THM700R4 (Stock)
Axle/Gears: Stock 2.73 gears. No Posi
Re: Replacement fog lights
Are you talking about the actual fog light units or the bulbs?
Member
Joined: Dec 2008
Posts: 267
Likes: 2
From: Morgantown PA
Car: 89 GTA
Engine: 5.7 TPI
Transmission: 700R4
Member
Joined: Dec 2008
Posts: 267
Likes: 2
From: Morgantown PA
Car: 89 GTA
Engine: 5.7 TPI
Transmission: 700R4
Re: Replacement fog lights
http://www.classicindustries.com/product/1992/camaro/parts/g6704.html
Complete OEM assembly for the 92 z28. A bit pricy, but it's the original assemble for the car so I'd expect as much. They have the left and right side respectively.
Complete OEM assembly for the 92 z28. A bit pricy, but it's the original assemble for the car so I'd expect as much. They have the left and right side respectively.
Member
iTrader: (1)
Joined: May 2015
Posts: 341
Likes: 5
From: Eastern Canada NS
Car: 1987 IROC z
Engine: 350 TPI
Transmission: 700R
Axle/Gears: POSI 3:27s
Re: Replacement fog lights
The OEM lights are crzy expensive. But IMO they are the only ones that look proper for our Cars. All other aftermarket ones look like crap.
Trending Topics
Member
Joined: Dec 2008
Posts: 267
Likes: 2
From: Morgantown PA
Car: 89 GTA
Engine: 5.7 TPI
Transmission: 700R4
Re: Replacement fog lights
http://www.hawksmotorsports.com/fog-lamp-camaro-new-gm-85-92-fog-lamp-assm-z28-iroc/
Still pretty expensive, but a brand new OEM part for a 25-30 year old car is gonna cost you regardless.
Member
Joined: Dec 2008
Posts: 267
Likes: 2
From: Morgantown PA
Car: 89 GTA
Engine: 5.7 TPI
Transmission: 700R4
Re: Replacement fog lights
Getting them used is also another issue as they were made out of glass with a rather cheap metal housing. So most are corroded or the glass is cracked. If you are trying to restore this car I would say spend the money for the OEM. They are worth it. I got them for my GTA and they are great.
Last edited by bryan623; Jul 6, 2016 at 10:08 PM.
Junior Member
Joined: May 2015
Posts: 2
Likes: 0
From: WI
Car: 1988 GTA T/A
Engine: 305 TPI
Transmission: T-5
Axle/Gears: 9-bolt 3.45
Re: Replacement fog lights
I replaced mine with a set, I sized matched a new set for off-road use, disassembled and refit the off road ones into the factory bezels. They do work better, the yellowed glass cuts the fog. this is on a 1988 GTA. I Can't get pics right now since its in getting a paint job.
Member
iTrader: (1)
Joined: Aug 2008
Posts: 132
Likes: 0
From: New York
Car: 1992 Z28
Engine: 350TPI
Transmission: 700R4 Auto
Axle/Gears: G92
Re: Replacement fog lights
Getting them used is also another issue as they were made out of glass with a rather cheap metal housing. So most are corroded or the glass is cracked. If you are trying to restore this car I would say spend the money for the OEM. They are worth it. I got them for my GTA and they are great.
Joined: Apr 2000
Posts: 3,938
Likes: 99
From: Huntsville AL
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Thread
Thread Starter
Forum
Replies
Last Post
gators_bucs_fan
Tech / General Engine
8
Jun 9, 2016 12:14 PM





