Uninstalling pics "how to jack up a rear end"
that last pic is great. 
04-24-2004, 04:53 PM
#5
Supreme Member
iTrader: (2)
Join Date: Mar 2004
Location: Kissimmee, FL
Posts: 1,941
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 357cid
Transmission: T5 Swap
Axle/Gears: 10bolt 7.5" 3.23 soon to be 3.73
lmao was it just too heavy or just really tight fitting..... also whyd u take it out
04-24-2004, 09:39 PM
#6
Supreme Member
Join Date: Jan 2001
Location: Kelowna, B.C.
Posts: 1,244
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 Camaro RS
Engine: 305 TBI
Transmission: 700r4
Axle/Gears: 2.73
that amount of MDF or particle board would be pretty heavy .. bet it helps with getting traction.. and help balance the car too.. 
04-25-2004, 12:57 PM
#7
its not heavy, i just cant get it out, so i tryed it with the hoste, lol
i have to cut it to get it out.... cuz i builed it thinking i would never take it out again, and i got all the air space i could ... well the + side is no one could ever steel the box
nor can i get it out my self
i have to cut it to get it out.... cuz i builed it thinking i would never take it out again, and i got all the air space i could ... well the + side is no one could ever steel the box
nor can i get it out my self Trending Topics
04-25-2004, 05:21 PM
#10
Supreme Member
iTrader: (2)
Join Date: Mar 2004
Location: Kissimmee, FL
Posts: 1,941
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 357cid
Transmission: T5 Swap
Axle/Gears: 10bolt 7.5" 3.23 soon to be 3.73
Originally posted by NEEDforSPEED
getting board of it
getting board of it
04-27-2004, 02:22 PM
#12
Originally posted by 1986CamaroSC
howd you get it in? did youput the top on while it was in the car?
howd you get it in? did youput the top on while it was in the car?
im going to try to un screw it, if not then all use a hammer and if not that a saw, why em takeing it out besides getting board with it and i builed a new system every year, the fact is too many ppl can see it weather they like it or not if i leave the camaro unatended i can just see whats going to happen, plans now is to use 2 of the subs and one of the amps you see in the pic up top, also i wanted to take off my taillights and clean them up... and dyno the hole well, and now all have room in the back for mine t-tops
04-27-2004, 10:09 PM
#13
Supreme Member
iTrader: (2)
Join Date: Mar 2004
Location: Kissimmee, FL
Posts: 1,941
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 357cid
Transmission: T5 Swap
Axle/Gears: 10bolt 7.5" 3.23 soon to be 3.73
Originally posted by NEEDforSPEED
i builed it as tight as i could... no space was spared :lala:
im going to try to un screw it, if not then all use a hammer and if not that a saw, why em takeing it out besides getting board with it and i builed a new system every year, the fact is too many ppl can see it weather they like it or not if i leave the camaro unatended i can just see whats going to happen, plans now is to use 2 of the subs and one of the amps you see in the pic up top, also i wanted to take off my taillights and clean them up... and dyno the hole well, and now all have room in the back for mine t-tops
i builed it as tight as i could... no space was spared :lala:
im going to try to un screw it, if not then all use a hammer and if not that a saw, why em takeing it out besides getting board with it and i builed a new system every year, the fact is too many ppl can see it weather they like it or not if i leave the camaro unatended i can just see whats going to happen, plans now is to use 2 of the subs and one of the amps you see in the pic up top, also i wanted to take off my taillights and clean them up... and dyno the hole well, and now all have room in the back for mine t-tops
04-29-2004, 01:04 PM
#17
TGO Supporter
iTrader: (7)
Join Date: Nov 2002
Location: MA, USA
Posts: 3,462
Likes: 0
Received 5 Likes
on
2 Posts
Car: 83 bird
Engine: 305/383
Transmission: WC T5
Axle/Gears: 3:42
It's a sad sight, but hey, if you are putting something better in! How about a fiberglass one? lol
I have a box I made with 3/4" MDF and that sucker weighs a ton! Small too lol
I have a box I made with 3/4" MDF and that sucker weighs a ton! Small too lol
04-29-2004, 05:41 PM
#18
Senior Member
iTrader: (4)
Join Date: Sep 2003
Location: w. boylston mass
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: 305
Transmission: t5
thats great, had to use the engine lift to get the box out
and looks like someone is a candidate for a new head liner
and looks like someone is a candidate for a new head liner
05-03-2004, 08:19 AM
#19
Supreme Member
Are you sure you had to cut it up? Looks like it could have just lifted out.
05-03-2004, 06:32 PM
#20
Originally posted by Pro
Are you sure you had to cut it up? Looks like it could have just lifted out.
Are you sure you had to cut it up? Looks like it could have just lifted out.
05-03-2004, 08:30 PM
#21
Supreme Member
mkay, im just saying looking at the photors it looked like it would slide right out.
05-06-2004, 12:00 PM
#23
Senior Member
Join Date: Dec 2001
Location: Cheektowaga., NY, USA
Posts: 862
Likes: 0
Received 3 Likes
on
2 Posts
Car: 91 Camaro RS
Engine: 305 TBI LO3
Thats kinda what im afraid of w/puttin in anything custom in my trunk..What happens when a bulb burns out? You gotta figure out how to get teh damn thing out.
05-15-2004, 05:48 PM
#24
Senior Member
iTrader: (2)
Join Date: Sep 2002
Location: Central Va.
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82' Z28 IROC Clone (SOLD)
Engine: 355
Transmission: Built TH-350
Axle/Gears: 3.73 Moser 12 bolt
In order for me to get my fiberglass box out I have to remove all the panels around it...They are cut to go around the box, lol
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
