Sub Box Ideas and Help Please
Sub Box Ideas and Help Please
Hey right now i've got a box holding 2 10's in my hatch well...its a sealed box on an angle so the subs fire off the glass...what i wanna know is...#1 is there anywhere i else i can put a box besides the well?...i can't take off my t-tops and store them in there proper location w/this box and it weighs a ton so its really hurting me...just wondering if anybody has any ideas on what else i can do w/my 10's...thanks
well you probley don't want to do this, but you could always, take out the two back seats and put subs there, but then you have the problem of only being able to fit you and one other person. just a idea, later
------------------
191(3.1)V6 1992 Pontiac Firebird,K&N drop in filter, bosch patinum spark plugs, Pioneer reciver, kenwood 4x6's, sony xplod 6x9's, two kenwood tornado 12's with a 300 watt jenson running them, check it out at www.geocities.com/my_92firebird
------------------
191(3.1)V6 1992 Pontiac Firebird,K&N drop in filter, bosch patinum spark plugs, Pioneer reciver, kenwood 4x6's, sony xplod 6x9's, two kenwood tornado 12's with a 300 watt jenson running them, check it out at www.geocities.com/my_92firebird
TGO Supporter
Joined: Jul 1999
Posts: 3,838
Likes: 4
From: Another world, some other time
Car: 86 LG4 & 92 TBI Firebird
Engine: The Mighty 305!
Transmission: 700R4
Axle/Gears: 3.42
Originally posted by BlackBird305:
i can't take off my t-tops and store them in there proper location w/this box and it weighs a ton so its really hurting me...just wondering if anybody has any ideas on what else i can do w/my 10's...thanks
i can't take off my t-tops and store them in there proper location w/this box and it weighs a ton so its really hurting me...just wondering if anybody has any ideas on what else i can do w/my 10's...thanks
------------------
-Justin-
T-Top '86 5.0L LG4 700R4 WS6
T-Top '92 5.0L TBI 700R4
My '86 Firebird Homepage
The F-body Model Kit Pictoral Archive (updated 9/18/00)
There can be only one!!
I used to have an 89 RS with t-tops with two twelves in the back. Have you considered a custom installion? You build a slam board to go straight across the back, it ends up lining up with the ridge around the plastic panels. You build side walls to hold it up and seal it with expanding foam. You can mount the amps inside on the bottom of the hatch. The only problem is that they are hard to tweak cuz you have to keep removing a sub to get at them. Anyways, this is how i had it in my rs and still had plenty of room up top to store my t-tops. The edge of the case will rest slightly on the board but wont cause distortion. Another option is to just carry the t-tops in the case in the back seat, i did that a couple times too. Good luck.
------------------
1991 Chevy Camaro Z28
350ci, 5.7L TPI
too many mods to list
------------------
1991 Chevy Camaro Z28
350ci, 5.7L TPI
too many mods to list
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM





