Im selling my camaro and want switch cd players out before i sell it. I want to put the kenwood in, replaceing the pioneer 8200 cd player i had in it, but i'm not real sure on which wire is for like the battery, acc, ground. I pretty much have all the speaker wires squared away, just not sure about the other wires, being there is a number of wires there. Thank you in advance.

 

well dude, im my site i have a tutorial on putting headunits in. Secondly, it the stock harness is in there, then get youself a harness kit and you wont have to worry about colors. If you or someone cut the wires, then theres a easy way to figure out the ground, acc and power. I can't remember color codes for my life, sorry.

------------------
1991 Firebird (GT40)
-LO3 305 TBI
-5 speed
-Open Element Air Filter
-Edelbrock Tower Strut Brace
-Kenwood Excelon Headunit w/ 10 Disc Changer
-Alpine MRP-F256 Amp
-Polk EX 4x6's, DX 6x9's, and EX Tweeters
-Kicker ZR240 amp (bridged)
-Dual JL W0 12" Subs

-------------------------------
My page with pics and stuff, and car stereo help.
http://members.aol.com/deadtrend1/index.html

 

Power is usually red, ground is black, and acc is usually either green or yellow.

 

When I last put in a CD player in my car I believe (always check with a test light) 12V constant from the deck went to orange in the car, the ignition lead went to a yellow wire and I made my own ground. You could use the old ground wire from your last deck though. Get a test light and make sure. It's a good habit to get into.