I bought a new switch for my electric fan because I thought it might not be turning the fan on. I can't find it on the engine and I can't find it in my chiltons. Does anyone know where it might be in my '86 Z28?

 

If it has one, it is in the pass. side head, between #6 and #8 exhaust ports, you can see it from under the car

 

thanx

 

could you send a pic of it because i am afraid i have to change mine too

 

SO what is the sensor on the LG4 between first two cylinders? I put my hypertech switch in there.......did I screw up?

 

if it's between #1 and #3 in the head it's the water temp sensor

 

so thats what I wanted to replace right? there is a sensor on the pass behind the last 2 cylinders

 

the fan switch is toword the rear of the pass head, the sensor at the front of the drivers side head is for the gauge

 

i'M A dumba$$ AGAIN!!!!

I installed the fan switch in the temp gauge sender's place. So now I took it out and put the temp unit back in. And installed the fan switch in the passenger side between the last two cylinders. It won't even get above 18 now WWAAAAHHHHOOOOOO


PS, It was a PAIN IN THE **** to install the fan switch, let me say it again PITA!!!!!!