ok i have a 92 camaro that had a 305tbi. and when i did an ls1/t56 swap i cut the vacuum lines coming form the fire wall to the intake for the a/c vents. well i need to get the vents out of default mod(defrost). and back to working normally. anyone have the vacuum line diagram from the control head to the intake manifold?

 

Take a look in this thread. You will need to scroll down a few messages until you find the one with the daigram attached. You can also use the diagram attached here.

https://www.thirdgen.org/forums/inte...r+vaccum+lines

You may need to right click on this diagram and "Save As' to your computer and then rotate it in some picture viewing software. Notet that the Vac. Tank is in the engine compartment and the "dash" in this diagram is actually the firewall.


Dave

 

dude you are the man! thanks a bunch

 

how about the full vacuum diagram for the 84 Z28??

 

have you tried the function yet . I don't have a full vacuum diagram for the 84 year, but I think you will find one if you search. Yuo might try limiting yur search to the TECH/General Engine board. There may also be one further back in this board.

Also have you look on the radiatior fan shround, under the hood. There should be one there, unless it has been removed.

Dave

 

fan shroud no originally from my car and yes I did use the search function maybe not hard enough

 

you can get just about any schematic from the autozone web site.

 

C.M.

Search using vacuum+diagram for the last six months in all boards. You will get about 37 hits, some with diagrams. However, I did not see a diagram for an 84 Z28 specifically. Or you could take a look at the autozone web site, as mentioned above, and see what they have.

Dave