I cannot find a crossfire injection water outlet/thermostat housing. Every one I found does not fit and the hose neck angle is way off.(napa, oehq, rock auto, and etc) it keeps hitting the a/c compressor. Does anyone have a CFI theromostat housing or know a suitable replacement?

 

LOL...I had that problem too-back when i first put in an
'84 vette engine in my z28,the vette housing was wrong
and the carb style one had the hose against the A/C
bracket...Found one from a '78 monza with the 151
"iron duke"that worked well after i notched the bolt
holes.Later found a proper C/F one
will check to see if i have a spare..

 

thanks please let me know what you find? do you have any part numbers?


I am planing on puting a 1984 corvette CFI 350 in my 1983 T/A sometime in the future. there is no susbstite for cubic inches

 

bump

 

bump

 

found a #on the one in my car;14037618-if that is a
good#possibly a GM dealer could find one...
meanwhile i will keep my eye out for one in my parts
stash

 

thanks
that is the correct GM part number but is discontinued by GM

let me know what you find in your stash

 

did not find any...i could find the monza one iwas using
and send that if you could use it
That sux that GM discontinued that part number-
probably some still around if the dealer could do a
search...

 

i looked at a standard carb thermostat housing and it
looks like if the bolt holes were notched so that the
housing could be rotated clockwize on the manifold,
hose might just clear the A/C bracket-might need washers under the bolt heads

 

bump