How do you remove the condensor
Thread Starter
Supreme Member
Joined: Feb 2004
Posts: 1,581
Likes: 3
From: So Cal
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
How do you remove the condensor
Now that I've removed the evaporator, thanks to your help.
I would like the same step by step instructions for removing the condenser.
I've removed all the AC parts with exception of the compressor which is new and I want to leave in and condenser. Thanks for any help.
Andy
I would like the same step by step instructions for removing the condenser.
I've removed all the AC parts with exception of the compressor which is new and I want to leave in and condenser. Thanks for any help.
Andy
Supreme Member
Joined: Jan 2009
Posts: 2,313
Likes: 115
From: belle fourche,s.d.
Car: '82 z28
Engine: L83 5.7
Transmission: 700r4-1985
Axle/Gears: 3.42 posi
Re: How do you remove the condensor
super easy-much easier than removing the evaporator-just disconnect the refrigerant lines,remove the upper rediator support or upper fan shroud half,lean radiator back a little and withdraw condenser
Thread Starter
Supreme Member
Joined: Feb 2004
Posts: 1,581
Likes: 3
From: So Cal
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Re: How do you remove the condensor
Do I need to remove the entire fan shroud. I unbolted the 4 bolts to the shroud that is on top of the radiator pushed the radiator as far forward as I dared and wasn't nearly enough room to lift the condenser out. the condenser has no fasteners except the shroud that keeps it in front of the radiator correct.
Thread
Thread Starter
Forum
Replies
Last Post