hello guys!well i just bought a 1992 camaro rs 3.1 with a manual tranny!!for greece is quite economical!but i was looking to upgrade it a little so i purchase that rapid velocity module from ebay!the instalation manual says to locate the intake temp. sensor!where is that in that 3.1 engine!please can you post a photo to indicate me!i also notice that the 3.1 engine has no mass flow sensor!

 

The intake air temperature sensor is located in the air cleaner. This is in the right front corner of the car, opposite side of the battery. Has 2 wires going to it.

You may want to re-consider the rapid velocity module. All they are is a resistor to fool the ECM into thinking the intake temperature is lower then it really is.

RBob.