Which color wires from the original MAF sensor go to which numbered terminals on a MAP plug? I switched mine, and it's wrong, and I can't remember which one goes to which, anyone who has done the conversion, can you tell me which one's go where? thanks.

PJ

 

Try this site:

http://www.eecis.udel.edu/~davis/z28/ecm_swap_730/

Ed did a bang up job describing this swap.

RBob.

 

RBob,
How do I e-mail Ed?
I've tried after scouring the site for some contact info, but can't seem to "connect".

 

I have looked through his site, but can't seem to find what I"m looking for. If anyone who has done the maf to map conversion could post on which color wires go to which numbered terminal on the new map plug, that would be great.

 

Can anyone help me out? I still cannot find a good picture of what I'm looking for. If anyone who has done the swap could tell me which color wire goes to which lettered terminal on the map plug, that would be great.

pj

 

Lucky I made my MAF to MAP harness plug and play. I was able to remove and check it easily:

MAF A = MAP A
MAF B = MAP C
MAF C = MAP B
MAF D = Not Used
MAF E = Not Used