Question on shift light
Thread Starter
Joined: Mar 2003
Posts: 1,149
Likes: 1
From: Gladstone, Missouri
Car: 91 Camaro RS
Engine: 5.0L TBI (ebl inside)
Transmission: T-5
Axle/Gears: 3.42 lsd 10 bolt
Question on shift light
Alright, by know we have figured out our tachs are off by doing some datalogging. I have looked some of the various shift light parameters have a few questions. Since the shift light comes from the ecm, is the rpms it gathers data from going to be the dataloggers values or the tach on the instrument panel. I'm sorry if that's confusing.
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: Question on shift light
Originally posted by Gladstoneiroc
. .. Since the shift light comes from the ecm, is the rpms it gathers data from going to be the dataloggers values or the tach on the instrument panel. I'm sorry if that's confusing.
. .. Since the shift light comes from the ecm, is the rpms it gathers data from going to be the dataloggers values or the tach on the instrument panel. I'm sorry if that's confusing.
RBob.
Joined: Jun 2003
Posts: 5,028
Likes: 78
From: Desert
Car: 1991 Z28 Vert
Engine: 383 single plane efi
Transmission: T-56
Axle/Gears: 8.8 with 3.73s
Rbob,
Did anyone ever figure out how to change the RPM that the "shift" light comes on at? I know there are the looooonnng posts about doing it, and I would hate to go back and read them to discover it had not been done yet.
Did anyone ever figure out how to change the RPM that the "shift" light comes on at? I know there are the looooonnng posts about doing it, and I would hate to go back and read them to discover it had not been done yet.
Supreme Member
iTrader: (2)
Joined: Jul 2003
Posts: 3,205
Likes: 0
From: Dallas, TX area
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Yep - It's in TunerCat, at least for the 730 with $8D mask. Might have to contact him to get the update, but it's there and works great!
I necessary, I can get the hex addresses where the data is stored, but I have no idea what the fomat of the data at those locations is....
I necessary, I can get the hex addresses where the data is stored, but I have no idea what the fomat of the data at those locations is....
Last edited by vernw; May 12, 2005 at 01:28 PM.
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Originally posted by Tibo
Rbob,
Did anyone ever figure out how to change the RPM that the "shift" light comes on at? I know there are the looooonnng posts about doing it, and I would hate to go back and read them to discover it had not been done yet.
Rbob,
Did anyone ever figure out how to change the RPM that the "shift" light comes on at? I know there are the looooonnng posts about doing it, and I would hate to go back and read them to discover it had not been done yet.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post