Switching to 6E from 32B
Thread Starter
Member
iTrader: (2)
Joined: Oct 2005
Posts: 395
Likes: 0
From: Central Coast, CA
Car: 1987 IROC Z/28 Camaro
Engine: 355
Transmission: T56
Axle/Gears: 9 Bolt w/ 4.10s
Switching to 6E from 32B
Hey guys, I have decided to switch to 6E in my 87 305 Auto IROC. I have tried some of the bins but my car will not start with them such as ARAP and Apyn3496 both of which I read were recommended in searches. I have not unplugged my 9th injector yet either. I was assuming it would at least run with it still in there for me to make sure this is the route I wanted to go. Anyone have any ideas for me? Could I find a stock 89 305 auto bin and would it fire up and run ok? I have tried to find one but I have not had much luck.
Help would be great.
-Jason
Help would be great.
-Jason
Joined: Mar 2000
Posts: 1,692
Likes: 1
From: Corona
Car: 92 Form, 91 Z28, 89 GTA, 86 Z28
Engine: BP383 vortech, BP383, 5.7 TPI, LG4
Transmission: 4L60e, 700R4, 700R4..
Axle/Gears: 3.27, 2.73
Disable VATS.
Try 6E with cold start injector disconnected.
Use an F-Body Bin (AUJM for example).
Try 6E with cold start injector disconnected.
Use an F-Body Bin (AUJM for example).
Thread Starter
Member
iTrader: (2)
Joined: Oct 2005
Posts: 395
Likes: 0
From: Central Coast, CA
Car: 1987 IROC Z/28 Camaro
Engine: 355
Transmission: T56
Axle/Gears: 9 Bolt w/ 4.10s
Thanks for your help bud. I disabled VATS and it fired right up. I guess I must have missed that part in all the reading I did. Sorry!
-Jason
-Jason
Joined: Mar 2000
Posts: 1,692
Likes: 1
From: Corona
Car: 92 Form, 91 Z28, 89 GTA, 86 Z28
Engine: BP383 vortech, BP383, 5.7 TPI, LG4
Transmission: 4L60e, 700R4, 700R4..
Axle/Gears: 3.27, 2.73
Hehe, no problem. It's one of the first things to un-check when doing proms, and first to come to mind when it won't fire up.
Enjoy your tuning!
Enjoy your tuning!
Thread
Thread Starter
Forum
Replies
Last Post
