CanadianBeast

Alright I just got my programmerand I pulled the eprom out of my jet chip used move to buffer and saved it, it worked. Then I used my eraser then plugged it back in to the PP and did a blank check, its says it's erased (ALL FF), I then load the buffer (arap 6e.bin) then try to program device and it says error or something like that and says it did not program. I have a 165 ecm using a 27c128 eprom. I read through the help files and everything seems to be in order, but it doesn't work.
Thanks

mike89z

Make sure that you are using the right program - - - I think its called fileprom.exe or something like that.

------------------
355 10:1 , AFR 190 heads, LT4 HOT cam w/ 1.6 roller rockers, complete Superram intake, 58mm BBK TB, 24# injectors, screens out of MAF, MAT relocated, March underdrive pulleys, Streetdampner, Crane HI-6 ignition, 160 thermostat, K&Ns, TES headers(Jet hot coated), Mufflex 4' cat back, B&M shift Kit, 2500 converter, and 3.27s.

CanadianBeast

I have been using it in windows, should I use the dos version?

Kevin91Z

iTrader: (1)

Yes, try exiting to DOS and running the DOS version of fileprom. I've run into that problem when using flash proms with the pocket programmer and the windows version. If I exit to dos mode and then use fileprom it'll program the flash proms. I think its the way Windows controls the port, that causes the problem.

------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-

CanadianBeast

What voltage should I be programming at with a 27c128 eprom??

Kevin91Z

iTrader: (1)

Doesnt it auto-select the voltage when you pick the PROM from the list?