DIY PROM Do It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.

Anyone Burning in MI?

Thread Tools
 
Search this Thread
 
Old May 29, 2001 | 06:14 PM
  #1  
StraightRollin's Avatar
Thread Starter
Junior Member
 
Joined: May 2001
Posts: 17
Likes: 0
From: Roseville, Mi, USA
Anyone Burning in MI?

Anyone burning any chips in Michigan? If so let me know and we can get in contact and help me out alittle here. Thanks again
Reply
Old May 29, 2001 | 07:45 PM
  #2  
Grumpy's Avatar
Supreme Member
 
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
<font face="Verdana, Arial" size="2">Originally posted by StraightRollin:
Anyone burning any chips in Michigan? If so let me know and we can get in contact and help me out alittle here. Thanks again</font>
What's the guestion?.
Or are you just out to get around the Chip Begging?.

Reply
Old May 29, 2001 | 08:28 PM
  #3  
StraightRollin's Avatar
Thread Starter
Junior Member
 
Joined: May 2001
Posts: 17
Likes: 0
From: Roseville, Mi, USA
im out to learn how to burn chips and see how someone does it. The question was, is anyone burning chips im MI? thats the question, i dont need to beg for a chip i already have one, so id appreciate it not to hear the rude comments. geez
Reply
Old May 29, 2001 | 08:41 PM
  #4  
lars92RS's Avatar
Member
 
Joined: Jul 1999
Posts: 226
Likes: 0
From: Toledo, OH USA
Car: '92 RS
Engine: In pieces
Transmission: Built 4L60
I'm in toledo. If you are looking for info and learning partners give me call. If your begging then I prolly can't help you.

-Lars
Reply
Old May 29, 2001 | 09:11 PM
  #5  
Grim Reaper's Avatar
TGO Supporter
 
Joined: Jul 1999
Posts: 10,907
Likes: 4
From: The Bone Yard
Car: Death Mobile
Engine: 666 c.i.
<font face="Verdana, Arial" size="2">Originally posted by StraightRollin:
im out to learn how to burn chips and see how someone does it. The question was, is anyone burning chips im MI? thats the question, i dont need to beg for a chip i already have one, so id appreciate it not to hear the rude comments. geez</font>
I agree that tagging up with someone will really helpful. I know that few that have dropped over to my place learnt a lot if a very short time.

But please, let's not start any flame wars. FYI, I had originally locked it, but Bruce (aka Grumpy) said leave it. You can thank Bruce.

[This message has been edited by Glenn91L98GTA (edited May 29, 2001).]
Reply
Old May 30, 2001 | 08:29 AM
  #6  
afgun's Avatar
Senior Member
20 Year Member
Liked
 
Joined: Mar 2001
Posts: 629
Likes: 10
From: New Yuck
Car: Non F-body :(
Engine: Pontiac 301
Transmission: TH350
I do some chip burning in Canton. Matter-of-fact, I'll probably be doing some this weekend if you're interested...

--andrew in Canton
Reply
Old May 30, 2001 | 11:52 AM
  #7  
StraightRollin's Avatar
Thread Starter
Junior Member
 
Joined: May 2001
Posts: 17
Likes: 0
From: Roseville, Mi, USA
no it was never gonna be any more than what was said. i just asked a simple question, and he seemed to make me out like a begger. I didnt do anything wrong, i just thought that was rude on his part, i have my own chip, but im having problems, so asking if anyone lives were i do was burning some would help me out alot. It was never an act of begging for a chip. it was a question of help thats all
Reply
Old May 30, 2001 | 11:53 AM
  #8  
StraightRollin's Avatar
Thread Starter
Junior Member
 
Joined: May 2001
Posts: 17
Likes: 0
From: Roseville, Mi, USA
no it was never gonna be any more than what was said. i just asked a simple question, and he seemed to make me out like a begger. I didnt do anything wrong, i just thought that was rude on his part, i have my own chip, but im having problems, so asking if anyone lives were i do was burning some would help me out alot. It was never an act of begging for a chip. it was a question of help thats all
Reply
Old May 30, 2001 | 02:32 PM
  #9  
Grim Reaper's Avatar
TGO Supporter
 
Joined: Jul 1999
Posts: 10,907
Likes: 4
From: The Bone Yard
Car: Death Mobile
Engine: 666 c.i.
As I said, I have no problem with trying to "network" with someone to "work together". It is actually quite beneficial and I would have enjoyed being able to tag up with someone when I was just starting.

But, if you look at some of the other posts, (and really since this board has existed) people have been asking for people to burn eproms for them and expecting that it should be done for basically "a case of beer".

This board USE to be a PRIVATE Board devoted to ONLY those enthusiasts that were TRULY into PROM burning. You basically had to be introduced to be allowed to join.

There are MANY of those "first timers" that would like to return to those days. But a decision was made to "open" the board to the General Public to allow ANYONE to come in and join in the fun...BUT with the provisal that it be STRICTLY to share information. No commercial activities, no selling of BINs or asking for BINs; etc.

There are some very talented people here (Grumpy and Traxion) just to name a few that could EASILY sell their knowledge. But they graciously give their knowledge freely...just not their BINS or eproms. They will assist you in programming a better BIN and if you have difficulty in resoving somethign, they will help to the best of their ability.

There are also some very talented people that while they may not post on the board, they will send you an e-mail to help you out. I have gotten a few of those myself, both from members asking for specific help and "these talented people" sharing some infomrtion that I would NEVER be able to get from anywhere else.

But, I can also say that since this board has been opened up, there have been a lot of people looking for a "cheap" eprom; and that is just not tolerated.

While you may think Grumpy's response was rude, based on the past history of people seeking "cheapie" eproms, his question was valid. And lastly, unlike the other boards, we don't get into flame wars or act rudely to other members. Any post that looks like it is instigating a flame war is immediately locked, if not deleted.

With that all said, do you have a SPECIFIC question relating to PROM burning other than if someone is located in your area?
Reply
Old May 30, 2001 | 04:01 PM
  #10  
StraightRollin's Avatar
Thread Starter
Junior Member
 
Joined: May 2001
Posts: 17
Likes: 0
From: Roseville, Mi, USA
no not really, just wanted to see if i could hook up with someone and learn how. cuz i asked a question about my chip that noone could answer, so learning to burn my own would be a good alternative.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
F.I. 57 Belair
DFI and ECM
8
Aug 23, 2021 01:09 AM
Thornburg
Aftermarket Product Review
10
Oct 6, 2015 12:04 PM
Logan Bryant
TPI
1
Sep 23, 2015 06:51 AM
CatmanFS
LTX and LSX
1
Sep 19, 2015 09:00 AM
Glowsock
Tech / General Engine
2
Sep 11, 2015 11:09 PM




All times are GMT -5. The time now is 11:38 AM.