Pocket programer
#1
Junior Member
Thread Starter
Join Date: Sep 2001
Location: San Bernardino CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Pocket programer
What is the trick getting the med-cal to verify to pocket programer. I can get it to verify after moving the med-cal several times in different directions.I lock the med-cal adaper into the pocket programer and then insert the med-cal , but osftware does not verify the med-cal. What I'm I doing wrong JOE
#2
Junior Member
Join Date: Sep 2001
Location: Woodlands, Texas, USA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
<font face="Verdana, Arial" size="2">Originally posted by righton:
What is the trick getting the med-cal to verify to pocket programer. I can get it to verify after moving the med-cal several times in different directions.I lock the med-cal adaper into the pocket programer and then insert the med-cal , but osftware does not verify the med-cal. What I'm I doing wrong JOE</font>
What is the trick getting the med-cal to verify to pocket programer. I can get it to verify after moving the med-cal several times in different directions.I lock the med-cal adaper into the pocket programer and then insert the med-cal , but osftware does not verify the med-cal. What I'm I doing wrong JOE</font>
I'm assuming that you mean mem-cal (memory calibration) when you say med-cal.
You have to have a program in the pocket programmer's software buffer in order to verify the prom. In order for the verification to be successful, the program in the prom and the program in the buffer have to be exactly the same.
------------------
1991 Chevy C2500HD 5.7L HD. 16147060 ECM
Mods: Crane PowerMax 2030 cam 204I 214E @ .050 and 423I 446E lift, Jacobs Pro Street Ignition System. Using DataMaster and TunerCat with $85 ECM files.
Thread
Thread Starter
Forum
Replies
Last Post