Turning off a.i.r.
Member
Joined: Mar 2008
Posts: 181
Likes: 0
From: Westminster, Maryland
Car: 1987 IROC-Z
Engine: 383ci SBC
Transmission: 700r4
Re: Turning off a.i.r.
I just replaced my entire exhaust and removed the AIR system entirely, no tune editing required (At least as far as I've noticed)
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Re: Turning off a.i.r.
In 8D there is a 100mV O2-constant that will be activated when AIR is enabled.
-> set it to 0mV
or
-> increase AIR enable temp so it never will be activated.
/N.
Dont have Tunerpro at the computer at work but if you dont find the constant, just post here and I will check at home.
-> set it to 0mV
or
-> increase AIR enable temp so it never will be activated.
/N.
Dont have Tunerpro at the computer at work but if you dont find the constant, just post here and I will check at home.
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 587
Likes: 0
From: Calif
Car: 75 Vette
Engine: 406 TPI
Transmission: 700 R-4
Axle/Gears: 373
Re: Turning off a.i.r.
When I turned off the A.I.R. in my chip chip, 8d
my VE tables went lean by about 5-10 counts,
is that normal.
Thanks
my VE tables went lean by about 5-10 counts,
is that normal.
Thanks
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 587
Likes: 0
From: Calif
Car: 75 Vette
Engine: 406 TPI
Transmission: 700 R-4
Axle/Gears: 373
Re: Turning off a.i.r.
[QUOTE=gta324;3768347]In 8D there is a 100mV O2-constant that will be activated when AIR is enabled.
-> set it to 0mV
DONE. Took me awhile, but I got it now Thanks
-> set it to 0mV
DONE. Took me awhile, but I got it now Thanks
Thread
Thread Starter
Forum
Replies
Last Post
83 Crossfire TA
Suspension and Chassis
0
Sep 8, 2015 12:06 PM
