Help, I can't datalog with TunerPro and Autoporm
Thread Starter
Junior Member
Joined: Apr 2010
Posts: 1
Likes: 0
Help, I can't datalog with TunerPro and Autoporm
I have been trying for so time now but I am still having problems getting the ALDL to connect to allow me to datalog and tune with Tunerpro RT.
I have no idea why it won't connect. Can some one help me trouble shoot this problem. I am using the Autoprom
I have no idea why it won't connect. Can some one help me trouble shoot this problem. I am using the Autoprom
Joined: Apr 2004
Posts: 3,180
Likes: 3
From: Browns Town
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
Re: Help, I can't datalog with TunerPro and Autoporm
Look at post #14 here.
https://www.thirdgen.org/forums/diy-...t-wnought.html
Should get you connected anyway.
Be sure to load your "correct" definition files before trying it out.
https://www.thirdgen.org/forums/diy-...t-wnought.html
Should get you connected anyway.
Be sure to load your "correct" definition files before trying it out.
Thread
Thread Starter
Forum
Replies
Last Post