I wanted to do a cold start data log with Tuner Pro 5 today. When I open TP to the dash screens they are all blank and when I try to connect TP to the aldl cable nothing happens, it doesn't even attempt to connect?? The computer battery died yesterday so I'm not sure if that effected anything? Thanks

 

data log screens are still blank. It looks like if I try to play a previous data log it is playing, meaning I can see the log bar graph moving at the top of the screen and it shows the name of the log. It also gets the Blue playing log box at the bottom of the screen but no info from the log shows up in the dash or any other data log info area???

 

Have you tried setting the gauges to a parameter?

 

have no idea what you mean, sorry not a big computer guy.

I sent Mangus a PM and he suggested this??

"Have you tried posting in the DIY-PROM board? If not, please do so. You probably need to reload your datastream definition (the ADS or ADX file) for your vehicle"


not sure how to do this, my car is an 89 6E 1227165. If someone could talk me through this step by step?.thanks for any help guys.

 

Reloading your ADS or ADX would be in other words opening the ADS or ADX file again, just like you did to load it the first time.

You can change each gauge's parameters by right clicking on each gauge and selecting what you want to display.

 

have no idea how that was done, its been a long time

looks like this guy had the same issue, not really following how he corrected it.
https://www.thirdgen.org/forums/diy-...rov5-will.html

 

ok, I reloaded my definition and its working again thanks guys!!