Looking for scan software for 91 TA, please point me in the right direction.
#1
Member
Thread Starter
Join Date: Apr 2001
Location: Hampton, Va, USA
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Looking for scan software for 91 TA, please point me in the right direction.
I am looking for Craig M.'s software to be specific, but if there is any shareware out there that will handle it's faster baud speed (faster than 160), please let me know...
Thanks for the help.
Clint
Thanks for the help.
Clint
#3
Supreme Member
Join Date: Mar 2001
Location: Ontario, Canada
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
<img src="http://www.plauder-smilies.de/rotfl.gif"> That was tooo funny!
On a serious note, I'm not sure if it works for a 1991 or not, but Craig Moates software is excellent... <a href="http://ice.prohosting.com/moates/gmecm/index.htm">http://ice.prohosting.com/moates/gmecm/index.htm</a>
On a serious note, I'm not sure if it works for a 1991 or not, but Craig Moates software is excellent... <a href="http://ice.prohosting.com/moates/gmecm/index.htm">http://ice.prohosting.com/moates/gmecm/index.htm</a>
#4
Supreme Member
Join Date: Jul 1999
Location: Baton Rouge, LA, USA
Posts: 1,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 T/A
Engine: 441 SBC 12.5:1 0.680" Lift
Transmission: T-56
Axle/Gears: 4.10 TruTrac Moser 9"
Hahaha! That WAS good...
It should work for any post-85/86 TPI.
It should work for any post-85/86 TPI.
#5
Senior Member
Join Date: May 2001
Location: Hollywood, FL
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 Regal
Engine: 82 FBod LG4 305, 730 ECM
Transmission: M20
Axle/Gears: 4.10
Come on now guys, he has TBI. And actually the only way he can communicate faster than the 160 baud is through the edge connector on the ecm's pcb. On DIY-EFI there is something called lockers which was originally designed for the 747 but I remember reading that it wasn't that big a deal to make it work on a 746. That is of course if he has a 746.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
05-17-2020 10:44 AM