EBL file conversion
Thread Starter
Member
Joined: Sep 2003
Posts: 248
Likes: 4
From: SE AZ
Car: 1990 Corvette, 1985 C-10 1979 Subun
Engine: 350, 406 HSR
Transmission: manual, 200 4r
EBL file conversion
I use the EBL P4 board in my ecm for tuning. I am aware that this uses its own code for the files.
I want to use an EBL file and burn it to a stock chip to work with a stock ecm, no EBL P4 installed.
Is there a file conversion process I need to follow first?
Thanks!
I want to use an EBL file and burn it to a stock chip to work with a stock ecm, no EBL P4 installed.
Is there a file conversion process I need to follow first?
Thanks!
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: EBL file conversion
Will need to copy the tables over to an $8D BIN. I can see the AE, SA, and VE, then maybe the injector compensation tables. But even at that the two code bases handle things a little differently.
There is no easy way to do a direct 1-for-1 conversion.
RBob.
There is no easy way to do a direct 1-for-1 conversion.
RBob.
Thread Starter
Member
Joined: Sep 2003
Posts: 248
Likes: 4
From: SE AZ
Car: 1990 Corvette, 1985 C-10 1979 Subun
Engine: 350, 406 HSR
Transmission: manual, 200 4r
Re: EBL file conversion
Thread
Thread Starter
Forum
Replies
Last Post