i just got done gutting my stock computer harness in preparation for my FAST stand alone harness

now i took out all of the computer wiring and made sure i only had to cut the splices where it went back to the computer.......

the only other wires that are left that dont plug into somewhere was for the ESC module that hang out of the connection on the driver side firewall

anyhow

i have the starter and battery harness separated and i'm kinda drawing a blank as to what was what. i have a few connections that have a place for an inline fuse, BUT the only one i remember having an in line fuse was for the fuel pump/ecm fuse

any idea on the other one?

Also, since my car was an 89 the starter/battery harness was meshed in with the computer harness and i had to separate them. The thing that is kinda puzzling me since i dont have a factory service manual just yet is there is a flat long connector with i believe 4-5 wires that connects to either the battery and/or starter harness....any idea what that is used for?

also i have a stock relay that is hooked up to that harness as well....i'm guessing it was the one on the passenger side fender for the fans. Sound about right?

i'm going to try and see if i can get a picture of it

thanks for any help