quick CC questionn..please read
Supreme Member
Joined: Jul 1999
Posts: 1,335
Likes: 2
From: Tucson, AZ, USA
Car: '92 Z28; Dk Teal; Her Pkg
Engine: 305
Transmission: Richmond 6 Spd
Axle/Gears: Moser 9", Detroit Locker, 3.70
If you are looking for the cruise control servo, it is located between the vapor canister and the radiator tank. The servo uses vacuum to actuate the throttle. The vacuum applied to the diaphragm is controled by two electromagnetic valves inside the servo.
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
Thread Starter
Member
Joined: Dec 2000
Posts: 202
Likes: 0
From: Summerville, SC, USA
thats what i thought but as i looked there was nothing there. i looked through a Hayes repair manual and the CC transducer is supposedly where the speedo cable hooks up to. so whats going on and where is the speedo cable? thanks
Supreme Member
Joined: Jul 1999
Posts: 1,335
Likes: 2
From: Tucson, AZ, USA
Car: '92 Z28; Dk Teal; Her Pkg
Engine: 305
Transmission: Richmond 6 Spd
Axle/Gears: Moser 9", Detroit Locker, 3.70
The Hanes manual in incorrect. Your '91 does not have a speedo cable - it uses an electronic VSS. The VSS buffer is located near the ECM & it drives the VSS signal to the ECM, the cluster & to the cruise control module - which is a black box mounted near the ECM, as well.
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM