Which are high beams with are low?
Thread Starter
Junior Member
Joined: Nov 2012
Posts: 8
Likes: 0
From: Parksville, BC Canada
Car: 1984 z28HO
Engine: 305HO
Transmission: T5
Which are high beams with are low?
Hi guys I just recently bought a 1984 z28 but the inner lights don't work are they the high beams or the low beams?
Member
Joined: Feb 2010
Posts: 116
Likes: 0
From: Grande Prairie, Ab
Car: 1987 Z28 / 1988 IROC-Z
Engine: 305 LG4 / 305 LB9
Transmission: T5 5spd
Axle/Gears: 3.42 / 3.08
Thread Starter
Junior Member
Joined: Nov 2012
Posts: 8
Likes: 0
From: Parksville, BC Canada
Car: 1984 z28HO
Engine: 305HO
Transmission: T5
Re: Which are high beams with are low?
I'm not sure if i am missing something but when i pull the switch for my lights once no lights come on and when I pull it twice only the lows are on. Is the high beam switch somewhere else? If so where? Really wish i had an owners manual lol
Joined: Oct 2005
Posts: 854
Likes: 107
From: KY
Car: 2 T-Tops
Engine: 327/305
Transmission: TH350/700R4
Axle/Gears: 3:42/2:73
Re: Which are high beams with are low?
I'm not much on Camaros...more of a Firebird guy, but if you have a pull **** for headlights, usually, part way out is parking lights, all the way out is low beam headlights. To activate high beams, you pull back the turn signal lever toward you and it will click. I'm just guessing here as it's been a long time since I've had a Camaro, but I'm pretty sure that's how it was.
Thread Starter
Junior Member
Joined: Nov 2012
Posts: 8
Likes: 0
From: Parksville, BC Canada
Car: 1984 z28HO
Engine: 305HO
Transmission: T5
Re: Which are high beams with are low?
Man i feel really stupid now LOL I could have sworn i tried that and it wasn't going back at all hahahaa but i just tried it and it works Thanks guys
Thread Starter
Junior Member
Joined: Nov 2012
Posts: 8
Likes: 0
From: Parksville, BC Canada
Car: 1984 z28HO
Engine: 305HO
Transmission: T5
Re: Which are high beams with are low?
One more question I have is how do you turn on the power antenna is it supposed to come on with the radio? Or is it a switch?
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Trending Topics
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
You Deserve A Raise
Originally Posted by Valtyr
how do you (raise) the power antenna is it supposed to come on with the radio?
To test the antenna motor gain access to the antenna motor connector at the back of the radio.
It’s the connector with three terminals.
With that connector unplugged, ground the gray wire, and apply power to the green wire.
If the antenna is good it will raise.
Next, this time ground the green wire, and apply power to the White wire.
If the antenna is good it will retract.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Didn’t Wreck, The Track Moved
Thread Starter
Junior Member
Joined: Nov 2012
Posts: 8
Likes: 0
From: Parksville, BC Canada
Car: 1984 z28HO
Engine: 305HO
Transmission: T5
Re: Which are high beams with are low?
The PO put in an after market radio and I think he just left it disconnected, at least thats what it looked like when i pulled it out but i will check the antenna before trying to hook it back up thanks nina
Last edited by Valtyr; Jan 2, 2013 at 11:33 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
26
Sep 21, 2015 01:08 PM
84 TA NV
Firebirds for Sale
1
Sep 6, 2015 08:02 PM
