Gauge cluster
Thread Starter
Junior Member
Joined: Aug 2016
Posts: 4
Likes: 0
Gauge cluster
I have a 1986 ta everything worked but the odometer I pulled the cluster and put another in it and it didn't work at all so I put mine back in and now the speedo isn't working everything else is but it all worked before
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Cluster Buster
Sounds like you inadvertently disconnected something.
See if the VSS signal is still getting to the dash.
Use an audio amplifier to make sure it’s getting a steady signal.
Connect the amp’s input to the gray wire pin 8 going to the dash at the dash connector on the right as you would a CD player.
If in 8 is not gray your dash configuration if different but you can find out which wire is coming from the VSS by physical tracing.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Nitromethane Smells Sweet Burning, But Please, No Roasting Marshmallows On The Zoomies
See if the VSS signal is still getting to the dash.
Use an audio amplifier to make sure it’s getting a steady signal.
Connect the amp’s input to the gray wire pin 8 going to the dash at the dash connector on the right as you would a CD player.
If in 8 is not gray your dash configuration if different but you can find out which wire is coming from the VSS by physical tracing.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Nitromethane Smells Sweet Burning, But Please, No Roasting Marshmallows On The Zoomies
Thread
Thread Starter
Forum
Replies
Last Post