Battery Cable Routing
Thread Starter
Joined: Dec 2000
Posts: 2,341
Likes: 151
From: Cincinnati,Ohio
Car: 1991 BandittII Firebird
Engine: 5.7 HSR
Transmission: 700R4
Axle/Gears: 3.27 9 bolt
Battery Cable Routing
Looking for battery cable routing for a TPI Firebird which has the battery on the driver side, my 91’ Firebird originally came 305 TBI which had the battery on the passenger side. I’m going to make my own battery cables and could use some inspiration with the factory routing so pictures would be very helpful.
Joined: Oct 2001
Posts: 12,213
Likes: 1,140
From: Il
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Battery Cable Routing
Starter over the motor mount,
through the clamp on the block
to the 2 clamps on the pass frame rail
down to clips under the dual fans
up to the clip on the steering box lines.
then to battery
through the clamp on the block
to the 2 clamps on the pass frame rail
down to clips under the dual fans
up to the clip on the steering box lines.
then to battery
Thread Starter
Joined: Dec 2000
Posts: 2,341
Likes: 151
From: Cincinnati,Ohio
Car: 1991 BandittII Firebird
Engine: 5.7 HSR
Transmission: 700R4
Axle/Gears: 3.27 9 bolt
Thread
Thread Starter
Forum
Replies
Last Post
JPrevost
Electronics
1
Aug 31, 2004 12:22 AM