HSR, B&M, Eagle, March, Edelbrock,RossRacing, Total Seal and GM

Reply Subscribe

Thread Tools

Search this Thread

Jul 7, 2006 | 05:20 PM

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

HSR, B&M, Eagle, March, Edelbrock,RossRacing, Total Seal and GM

Ross Racing Forged pistons, 4.030 bore, offset for stroker p/n is 90755 500+shipping
Total Seal Max Seal Rings for above pistons 200 +shipping
Eagle 3.75 ext balance crank for 1 piece rms. 175+ shipping
350 1 piece block, 4 bolt conversion mains. 80 w/ splayed conversion caps. pickup or youre arranging freight
305 centerbolt and 350 centerbolt heads 50 for both sets +shipping
TBI throttle body 20 obo + shipping
ECU with MAF w/o chip50 +shipping
Stock TBI intake 10 +shipping
surpentine belt system brackets 50+ shipping
timing chain cover 15 each + shipping
a/c compressor 20 each + shipping
MSD cap, coil, and rotor 110 + shipping
Stock single E-fan 25 + shipping
700R4 X-members umm, im not sure but shipping will prolly be 10 bux or so.
LSx series Truck oil pan, pickup, and tray 100+shipping

Packages Avalible:
Pistons and Rings- 650
Block components and Crank- 225
Block, Headstuds, and Crank- 300

other stuff not listed. if you are interested EMAIL ME. i dont get to my pm's in a timely manner so please email me.
Metalmulisha8504@hotmail.com

Last edited by RaverRacerX; Mar 16, 2007 at 05:11 PM.

Jul 8, 2006 | 08:12 PM

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttmft

Jul 9, 2006 | 12:29 AM

400CI87Firebird

Member

Joined: Dec 2005

Posts: 108

Likes: 0

From: cocoa beach florida

Car: 1987 pontiac firebird formula ws6

Engine: chevy 400 cubic inch V8

Transmission: turbo 350

what model shifter? pics to imnottomhull@yahoo.com please -Thanks-Tom

Jul 9, 2006 | 12:34 PM

ZZ4 86 Z28

Supreme Member

iTrader: (1)

Joined: Jul 2005

Posts: 2,435

Likes: 1

From: Rockville, Maryland

Car: 1986 Z28 Camaro Gunmetal Gray with

Engine: GM Crate ZZZ HO 350, Edelbrock head

Transmission: Rebuilt 700r4 all TransGo and Beast

Axle/Gears: 10 bolt with 3.73 gears

hey man, where you been? havent seen you around in a while...i still go on the weekends, it picked up again. you wouldnt happen to have any carb swap stuff laying around would you?

Jul 9, 2006 | 10:17 PM

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by ZZ4 86 Z28

hey man, where you been? havent seen you around in a while...i still go on the weekends, it picked up again. you wouldnt happen to have any carb swap stuff laying around would you?

nope, but i have the hsr
----------

Quote:

Originally Posted by 400CI87Firebird

what model shifter? pics to imnottomhull@yahoo.com please -Thanks-Tom

console mega shifter
----------
if you guys have questions please EMAIL ME
i also still have the pro mag rockers 200 obo 1.52:1

Last edited by RaverRacerX; Jul 9, 2006 at 10:21 PM. Reason: Automerged Doublepost

Jul 10, 2006 | 05:01 PM

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

400ci uve got pm

Jul 11, 2006 | 11:38 PM

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

bumperroo

Trending Topics

88 L98 not starting when warm

101

2.2k
Code 5JK stamped on the axle tube 3:73 Posi?

21

364
I want a reliable fuel pump for my 4th gen tank-LS427/570 swapped, 1987...

23

393
Rob's 1990 Formula 350 Medium Maui Blue Metallic

31

1k
Borg-Warner 9-bolt axle seal replacement

30

17.5k

Jul 12, 2006 | 01:29 PM

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

bumppp

Jul 12, 2006 | 03:36 PM

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

TTT
----------
ttt...

Last edited by RaverRacerX; Jul 12, 2006 at 03:37 PM. Reason: Automerged Doublepost

Jul 12, 2006 | 09:06 PM

#10

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

tt tizzle

Jul 12, 2006 | 10:29 PM

#11

IROC86350

Junior Member

iTrader: (6)

Joined: Apr 2002

Posts: 62

Likes: 0

From: Highland Twp MI

Car: 1986 IROC-Z

Engine: 383 TPI

Transmission: 700R4 2500 stall

Axle/Gears: 3.70 Moser 9in

Fluid Damper?

Jul 13, 2006 | 12:45 AM

#12

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

nope,

Last edited by RaverRacerX; Jul 13, 2006 at 01:03 AM.

Jul 13, 2006 | 07:15 AM

#13

joephis2002

Junior Member

Joined: Jul 2006

Posts: 46

Likes: 0

Wondering if the intake will fit a TPI 5.7? Also are the heads for the 350 just stock or do they have work done? Thanks.
Steve

Jul 13, 2006 | 08:14 AM

#14

ls1>*

Member

iTrader: (32)

Joined: Oct 2003

Posts: 448

Likes: 2

From: Indiana

Car: '88 Camaro

Engine: LS3

Transmission: Mag F

Axle/Gears: 9" 4.11

details and maybe a pic of the ministarter?

Jul 13, 2006 | 01:34 PM

#15

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by joephis2002

Wondering if the intake will fit a TPI 5.7? Also are the heads for the 350 just stock or do they have work done? Thanks.
Steve

jus stock heads, i wass gonna hog out the 305 heads and use on a 383 but plans change. Which intake? the hsr will bolt right up.
the ministarter is a powermaster with a standard bolt pattern, its not a cheap summit brand. its never been fired

Jul 13, 2006 | 04:09 PM

#16

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttt...

Jul 13, 2006 | 04:53 PM

#17

ls1>*

Member

iTrader: (32)

Joined: Oct 2003

Posts: 448

Likes: 2

From: Indiana

Car: '88 Camaro

Engine: LS3

Transmission: Mag F

Axle/Gears: 9" 4.11

153 tooth?

Jul 13, 2006 | 07:32 PM

#18

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by randy87iroc

153 tooth?

yes yes it is

Last edited by RaverRacerX; Jul 13, 2006 at 07:35 PM.

Jul 13, 2006 | 11:04 PM

#19

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttt

Jul 14, 2006 | 05:21 PM

#20

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttt...

Jul 15, 2006 | 10:47 PM

#21

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttt

Jul 15, 2006 | 11:06 PM

#22

V6sucker

Supreme Member

Joined: Feb 2003

Posts: 1,287

Likes: 1

Car: a car being parted out

Engine: blown up

Transmission: in peices

never seen so many self bumps...

Jul 16, 2006 | 01:36 PM

#23

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

bump

Jul 16, 2006 | 09:55 PM

#24

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

bump

Jul 17, 2006 | 03:11 PM

#25

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttt again

Jul 18, 2006 | 04:12 PM

#26

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

tty...

Jul 18, 2006 | 04:39 PM

#27

V6sucker

Supreme Member

Joined: Feb 2003

Posts: 1,287

Likes: 1

Car: a car being parted out

Engine: blown up

Transmission: in peices

my god quit bumping your own thread...
jez, once or twice maybe but pushin about a dozen times... that gets rediculous

Jul 18, 2006 | 04:49 PM

#28

Damn Camaro

Junior Member

Joined: Jun 2006

Posts: 6

Likes: 0

From: Philly Area ... PA

Car: 91 Camaro RS

Engine: 305

Transmission: auto

Axle/Gears: posi

You have any pics of the headers?

Jul 18, 2006 | 05:02 PM

#29

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by V6sucker

my god quit bumping your own thread...
jez, once or twice maybe but pushin about a dozen times... that gets rediculous

not when ur trying to sell a bunch of stuff.
no, ill get some though

Jul 18, 2006 | 05:08 PM

#30

400CI87Firebird

Member

Joined: Dec 2005

Posts: 108

Likes: 0

From: cocoa beach florida

Car: 1987 pontiac firebird formula ws6

Engine: chevy 400 cubic inch V8

Transmission: turbo 350

can i get a tracking number or something? thanks-Tom

Jul 18, 2006 | 05:09 PM

#31

Damn Camaro

Junior Member

Joined: Jun 2006

Posts: 6

Likes: 0

From: Philly Area ... PA

Car: 91 Camaro RS

Engine: 305

Transmission: auto

Axle/Gears: posi

whats the size & whats the condition of the headers?

Jul 18, 2006 | 06:34 PM

#32

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by Damn Camaro

whats the size & whats the condition of the headers?

id have to measure them, i didnt buy them new. they were installed on the roller i got but never actually had anything run through them. they have some surface rust but thats not uncommon. they were painted with high temp black paint.

Jul 19, 2006 | 12:47 PM

#33

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttt for today

Last edited by RaverRacerX; Jul 19, 2006 at 12:52 PM.

Jul 19, 2006 | 02:09 PM

#34

niceroc

Member

iTrader: (2)

Joined: May 2005

Posts: 334

Likes: 1

From: Palatine, IL

Car: 87 iroc

Engine: 454 .030 over

Transmission: th-350

Axle/Gears: 9 bolt

the flywheel.. is it internal or external balance, 1 or 2 peice rear main?

Jul 19, 2006 | 08:55 PM

#35

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by niceroc

the flywheel.. is it internal or external balance, 1 or 2 peice rear main?

ext 1 piece

Jul 20, 2006 | 11:36 AM

#36

Pastor John

Junior Member

Joined: Jul 2004

Posts: 9

Likes: 0

From: Apopka, FL

Car: 86 Trans AM

Engine: 305 TPI

Transmission: Mad Dog 700R-4

Axle/Gears: 3.23 Posi

Headers

1. Do they bolt to stock y-pipe?
2. Price shipped to 32712, Orlando area?
3. Can you send me pics?

Money in hand--ready to buy.

Jul 20, 2006 | 01:13 PM

#37

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by Pastor John

1. Do they bolt to stock y-pipe?
2. Price shipped to 32712, Orlando area?
3. Can you send me pics?

Money in hand--ready to buy.

1. no they do not, you need a y for them
2. 15
3. i will get them for you asap

Jul 20, 2006 | 05:31 PM

#38

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

----------

Last edited by RaverRacerX; Sep 15, 2006 at 04:59 PM. Reason: Automerged Doublepost

Jul 21, 2006 | 01:05 AM

#39

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

ttt...

Jul 21, 2006 | 06:56 AM

#40

Madcrazy

Junior Member

Joined: May 2006

Posts: 84

Likes: 0

From: Columbus

Car: '91 Formula

Engine: 5.0 TBI

Transmission: 700r4

How much shipped to 43119 for the edelbrock tbi manifold? Also, any pics?

Jul 21, 2006 | 12:24 PM

#41

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by Madcrazy

How much shipped to 43119 for the edelbrock tbi manifold? Also, any pics?

shipping is 10 bux

Jul 22, 2006 | 12:46 AM

#42

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

night bump

Jul 22, 2006 | 05:53 AM

#43

Madcrazy

Junior Member

Joined: May 2006

Posts: 84

Likes: 0

From: Columbus

Car: '91 Formula

Engine: 5.0 TBI

Transmission: 700r4

Sorry, Thats what I can get it for here at jegs

Jul 22, 2006 | 11:16 AM

#44

Pastor John

Junior Member

Joined: Jul 2004

Posts: 9

Likes: 0

From: Apopka, FL

Car: 86 Trans AM

Engine: 305 TPI

Transmission: Mad Dog 700R-4

Axle/Gears: 3.23 Posi

Headers--Purchase Info?

Quote:

Originally Posted by RaverRacerX

1. no they do not, you need a y for them
2. 15
3. i will get them for you asap

_______________________

Email me at pastor-john@peoplepc.com to set up purchase. I will pay $60 for the headers, shipped to Apopka, FL.

John Thompson
Apopka, FL

Jul 22, 2006 | 12:51 PM

#45

RaverRacerX

Thread Starter

Senior Member

Joined: Jun 2003

Posts: 828

Likes: 3

From: Rockville, MD

Car: 1989 Camaro RS

Engine: Ellis Juan

Transmission: t-56

Quote:

Originally Posted by Pastor John

_______________________

Email me at pastor-john@peoplepc.com to set up purchase. I will pay $60 for the headers, shipped to Apopka, FL.

John Thompson
Apopka, FL