I have pulled the tuned port setup off of my car. It has a BBK AFPR, holley air foil, freshly cleaned injectors, dizzy with accel cap and rotor, and an MSD blaster coil. One tube has some dents, but for 10 dollars you can buy them ***** on ebay. I have not planned on pulling the harness, but the ecu comes with it. Make offers. Thanks

 

bump. someone out there needs this.

 

I also have a cam that will work perfectly with the stock ecm. cammoton and tpis both said it was as big as you could go the the mass air ecm. it is a .458/.472 lift and 210/218 duration @ .050. it is brand new in the box. this should make a sweet motor. I run 13.9 last year with a stock tpi, just had the afpr, air foil, 2200 stall, and long tubes. that was on 225/50zr16 kumho 711 with 2.77 gears. i pulled a 1.87 60'. i think if i had the cam i could have went 13.5-13.7. make offers. thanks

 

bump

 

here are some pics.

 

if i do not sell this on here i will put it on ebay. i would rather sell it to someone on here. I will take 300 plus shipping for the whole thing with the cam.

 

ttt

 

bump

 

bump

 

You have a PM

 

bump

 

Sold! I have the TPI. Good word for 355gta. Everything was as described. Somebody buy the cam from him.

 

thanks. is was nice doin business with you. i will check on the block tomorrow.

 

are the heads for sale possibly? i think i need new heads :S castin #081 i think:S

 

the long block is gone. all i have left is a new cam and a 36mm sway bar.