I have a ton of stuff i need to get rid of. most of it is brand new, just sat around for a year or so. Build a project car and now Ive taken it apart and have stuff all over the house....

* 2 PCMs/ECUs service numbers are TPI - 1227165, TBI- 1227747 $40 each shipped in the US (stock proms are in there)

* 2 MSD distributers, one is vacuum and the other is electronic advance PNs are: Vacuum - 8361 Electronic - 85551 $155 shipped in the US (have brand new in box cable extension for $5)

* AC and SMOG delete pully(s) brand new, installed and NEVER have had a belt on them $85 for the set shipped in US

* 350 bored .040 out LONG BLOCK i had this machined and the heads have been cut and given a valve job. Contains a crane cam (mild) and speed pro forged pistons PICK UP ONLY please! No rockers on the engine though $250 FIRM

*360 degree KN air filter, crome about 200 miles on it. Fits carbs and TBI (had it on my truck) $40 shipped in US

* REMANUFACTURED TBI its a 220 model. Cost me 90 bucks in parts alone to re-man this and the fuel pressure regulator diaphram and spring have been replaced! stock injectors $125 shipped in US

* Holly 700 cfm double pumper carb. Fired about 10 times on my project car, this thing is mint $175 shipped in US

* Holly avenger intake (street dominator 2) high rise manifold $80 shipped in US

* HEADERS Headman 14 guage aluminum 82-92 f-body. Very nice headers. $125 shipped in the US. No gaskets though, sorry

*Harwood 2 1/2 Cowl hood. Put the hood on my camaro but never trimmed it. They come un trimmed so you can fit to your specific application. Asking $225. Its still black primer

* Notch Back(s) I have 2, one from a tojan TA. That one has over hangs that come over the sail panels on the f body because they had a kit on there that it mated to. They can be trimmed off or fab something for your panels. asking $150 the other is a direct fit Notch. Its the style that has the louvers and the bumb in the deck. The louvers look like the ones on camaro hoods. asking $300 PICK UP ONLY please!

* Anaversery Spoiler. Off the 91-92 Camaro. its blue with 2 stripes in the middle. $150 Shipped in the US

Most of this stuff came off my project car that was never on the road. Never got around to finishing it. Tons of good stuff on it that ill be taking off after the snow.

 

Description of headers/Part number? A.I.R. compatible, Y-pipe included?. Thanks!

 

Your location??

 

im in the boston area. there is no Y pipe, i never bought one when i got the headers. youll have to buy an o2 sensor bung, there isnt one on the headers but ill double check 2morrow. the headers are in EXCELLENT shape. the headers PN is 500-68478

 

headers still for sale? I live 20 mins north of boston and could pick them up very easily. Any chance I could have some pictures of the headers or what you have for them hardware wise? ammoniableach@yahoo.com Thank you

 

PM sent...

 

all i have are the headers. im sure the bolts are kickin around somewhere but i doubt ill find all of them. you can get a nice set of hardware and gaskets from any speed shop from 20-40 bucks depending on what you want. you sure can come pick them up! ill send pictures but it may take a bit for me to get a camera. you can come take a look if you want, i assure you they are in fantastic shape
----------
btw guys im in need of some fuel injectors. looking for some nice 24-26lbs. swapped the cam, heads and many other things onto my engine and now am in need of larger injectors so im open for a trade

 

UPDATE guys: The TPI PCM and the headers are sold. The pullies just got sold. sorry guys.

 

ill take the vacuum advance dist. if you still have it, what kinda payment do you accept?

 

I take Money Orders. Theres a guy who lives 20 minutes away whos supposed to be calling me later on it. Hes coming up this weekend to get the other stuff he got so ill have to get back to you on the distributer. If he doesnt let me know by tomorrow, its yours. ok?

 

Still have the TBI ECU? If so, what year did it come out of? And M5 or A4? If you don't know M5 or A4, can you give me the 4 letters off of the top of the PROM chip? I'd really appreciate it. I am dire need of a stock PROM chip for my '89 305TBI.

- Chris

 

all i see is AMUR on the top of one of the chips. they have a black cage like retainer on them and i really dont want to force it off and risk breaking it

 

Yea, don't pull that black casing off haha. I am going to run those letters and see what I find out. I will let you know within a day or so. And this is the TBI ECU you took those letters off of right?

 

yes its a TBI not a TPI. run them and let me know

 

It is out of a 1987 350TBI 700R4 Van/Truck. I can't use that ECU however. GL w/the sale.

 

wow thats weird. lol thanks for the info i had no idea

 

Yea, the guys at TBIchips.com really helped me out with that. They have also helped me out with finding out other information on chips. Hey, heres an idea. Email them and see if they want to buy the ECU off of you. Maybe they could use it...

 

i can just sell it on FSC.com. not a big deal. thanks for the info and sorry i couldnt help you out with a PCM

 

It's all good bro. Actually, srhansen78 PM'ed me. He has a stock chip for an '89RS 305TBI, M5 car, which is exactly what mine is.

 

Do you still have the 85551 distributor? What shape is it in?

 

the distributors are long gone dude, sorry