I have a set of S/R heads from World Products, 175cc intake, 58cc Combustion chamber, They have some bowl work done, Fully assembled with springs good to .500 lift and about 9k miles on them. I also have a pair of SLP 1 5/8 shorty headers, and an MSD distributor Model #8366. Headers and distributor also have about 9k miles on them.I also have a whole box full of stuff im not using like a brand new black powdercoated spohn drive shaft loop, a good condition stock water pump, stock injectors , stock throttle body, used K&N air filter in good condition just needs to be cleaned, windsheild wiper motor, windsheild washer fluid tank, perimeter bolt valve covers polished finish they are not in that great of condition though just some used old valve covers , also have a set of centerbolt valve covers they are black and I think they are some old stockers from somewere. All prices are negotiable so just make me an offer. I have a really good trader rating on LS1tech.com aswell.

Prices
World Products Heads/ $550 Shipped
SLP Headers/ $200 Shipped
MSD Distributor/ $220 Shipped

I will be able to get pictures sometime tonight or tommorow, as soon as I can get my hands on my brothers digital camera. PM me if interested, Thanks.

 

ttt

 

Any close up pics of the heads?

 

PM sent

 

Yes i can get some close ups of the heads were would you like me to send them to?

 

where are you from?

 

Rochester, NY

 

Do The Header Have Air, Do They Come With A Y-pipe?

 

There is no air and no y-pipe.

 

ttt

 

got pics of the heads?

 

Yes I do have pics of the heads if you could send me your e-mail address I will send those right out.

 

ttt

 

ttt

 

Please send all pics of the heads to z2868ss@yahoo.com, I am very interested. Is there anything else you can tell me about the heads? They are complete or bare? Iron Correct?

-Thanks,

P.S I live on LONG ISLAND would you be able to meet somewhere in between sometime if i do decide to buy these.

 

are the headers coated? are they d ports?

thanks

 

Pics have been sent out for the heads. The headers are rectangular port and they are painted black.

 

Are all the springs there for both heads? Also are they neg.

-Thanks

 

Yes I have all of the springs just had some out for the pics. I dont know what you mean by neg?

 

Sorry,
I meant are you negotiable with the heads?

-Thanks

 

Make me an offer and I will let you know if I can do it.

 

Incase you dont see my edit at the top I ran the receipt number for these heads and they are S/R heads not S/R Torquers. Sorry for any confusion.

 

I searched online but couldnt find any S/R heads that are 58cc. Are you sure thats the correct number. I'll give you $300 for them.

 

Here is a link to summit's site these are the heads I have, http://store.summitracing.com/partde...5&autoview=sku

Sorry I cannot accept $300, it is $389 just for "one" of these heads brand new. I dont think I can take anything less than $525 shipped.

 

ttt

 

ttt

 

Can you tell me more about the Distributor? (I need one for my 88 IROC 5.7 engine) Also, are you set up with Paypal???
Thanks, Nitro

 

Im interested in heads, shoot me the pics at simsc88@***.net plz.

 

Here is a link to summits site for more info on the distributor. If you would like pics let me know what email to send them to. Im sending the pics of the heads to you now Z28 guy. http://store.summitracing.com/partde...5&autoview=sku

 

Are these heards are pre, or post '87 manifold bolt layout?

 

I had them on my 88 TA so I guess that would make them post 87 bolt layout.

 

I was getting my hopes up, damn!! Thanks for the responce.

 

ttt

 

ttt

 

i have 355 carbed engine that i need shorty headers with no emissions tubes will these work i'll be running true dual exhaust probably 3'' pipes, not sure if compatible with set-up or what else you need to know, new to all this sorry

tony

 

Well there are no air tubes on them, And the end of the collectors is 3 inches so you would be able to connect them to your 3" pipes.

 

Well I still have all the parts listed in the original post but I also have a whole box full of stuff im not using like a brand new black powdercoated spohn drive shaft loop, a good condition stock water pump, stock injectors , stock throttle body, used K&N air filter in good condition just needs to be cleaned, windsheild wiper motor, windsheild washer fluid tank, perimeter bolt valve covers polished finish they are not in that great of condition though just some used old valve covers , also have a set of centerbolt valve covers they are black and I think they are some old stockers from somewere. All prices are negotiable so just make me an offer. I have a really good trader rating on LS1tech.com aswell.

 

Still got the headers?
got any pics?
do you have a y pipe?
1 3/4 I would guess.

 

Yes i still have the headers they are 1 5/8, the y pipe i have but it has been modified to fit under my deep oil pan and hangs really low so it probably is not a good idea to use it like that... I have pics what is your email address if your interested.

 

vwsuperbug74 at aol dot com

I actualy live in rochester ny, but I dont think the headers will fit my lt1 since the heads are D shaped. I will have to check and see. send pics anyway just incase they will.

 

Sorry for the delay I have been really busy, But I am sending the pics out now.