camaro ford 9 inch car for parts
camaro ford 9 inch car for parts
come on NO one is interested in this car this is a nice car and
wouldnt take to much to finish up... make me a offer PLEASE
For sale 3800 or best offer Trades 4 wheeler, golf cart
in michigan 517 548 2325
FOR SALE 1984 Camaro with t-tops DRAG race chassis with a SBC engine car weighs
less than 2800 pounds this car was store in a garage for 11 years before I
got it I have had it 2 years and made it more of a drag race car I put a
moser ford 9 inch rear end in with 35 spline moser lifetime axles 411 gears
bearings ect are all new 1.5 years ago I bet I don't have 30 pass on it with
the new rear end, I put all new k-member lower a-arms and drag coil over
ft struts over 1400.00 in that stuff and never used it just installed it and now
a year later I must sell and can not finish my loss your gain
also has a 8 point roll cage, race car, no dash just the pad I have a new
cover for it that I never put on
I painted the car the paint is super nice for a race car but not show car nice
, the car has no bondo its not a rust bucket it is solid straight car there are a
few door dings real small but show up when you look at it just right, there
are a few other nicks rub marks in the paint look at pictures
lights, blinkers brake lights power windows all work ( I was wanting to race
the street class)
PA racing K member, A arms, Koni Drag race struts Front coil over spring
kit from PA racing
Fiberglass 5 or 6 in cowl hood
1.5 fuel cell
Moser rear end with 35 spline axles 411 gears
26 x 10 slicks and skineys on the front with weld wheels
8 point roll cage
2 inch drop spindles in the front
2 inch lower springs in rear
Chrome Molly adjustable lower control arms and pan hard bar
Rear disk brakes
all new brake lines, master cylinder with front line lock on ft brakes all the
brakes and calipers are new
I have the best of everything and more parts than I can remember
this car has been sitting out side for the past year and needs a good home....
call me with questions 517 861 7122 jim
this is a link for more pictures
http://www.onestopperformance.com/carforsale
<img src="http://i173.photobucket.com/albums/w77/onestopjim/100_6664.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket">
<img src="http://i173.photobucket.com/albums/w77/onestopjim/100_6665.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket">
<img src="http://i173.photobucket.com/albums/w77/onestopjim/100_6663.gif" border="0" alt="Photo Sharing and Video Hosting at Photobucket">
wouldnt take to much to finish up... make me a offer PLEASE
For sale 3800 or best offer Trades 4 wheeler, golf cart
in michigan 517 548 2325
FOR SALE 1984 Camaro with t-tops DRAG race chassis with a SBC engine car weighs
less than 2800 pounds this car was store in a garage for 11 years before I
got it I have had it 2 years and made it more of a drag race car I put a
moser ford 9 inch rear end in with 35 spline moser lifetime axles 411 gears
bearings ect are all new 1.5 years ago I bet I don't have 30 pass on it with
the new rear end, I put all new k-member lower a-arms and drag coil over
ft struts over 1400.00 in that stuff and never used it just installed it and now
a year later I must sell and can not finish my loss your gain
also has a 8 point roll cage, race car, no dash just the pad I have a new
cover for it that I never put on
I painted the car the paint is super nice for a race car but not show car nice
, the car has no bondo its not a rust bucket it is solid straight car there are a
few door dings real small but show up when you look at it just right, there
are a few other nicks rub marks in the paint look at pictures
lights, blinkers brake lights power windows all work ( I was wanting to race
the street class)
PA racing K member, A arms, Koni Drag race struts Front coil over spring
kit from PA racing
Fiberglass 5 or 6 in cowl hood
1.5 fuel cell
Moser rear end with 35 spline axles 411 gears
26 x 10 slicks and skineys on the front with weld wheels
8 point roll cage
2 inch drop spindles in the front
2 inch lower springs in rear
Chrome Molly adjustable lower control arms and pan hard bar
Rear disk brakes
all new brake lines, master cylinder with front line lock on ft brakes all the
brakes and calipers are new
I have the best of everything and more parts than I can remember
this car has been sitting out side for the past year and needs a good home....
call me with questions 517 861 7122 jim
this is a link for more pictures
http://www.onestopperformance.com/carforsale
<img src="http://i173.photobucket.com/albums/w77/onestopjim/100_6664.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket">
<img src="http://i173.photobucket.com/albums/w77/onestopjim/100_6665.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket">
<img src="http://i173.photobucket.com/albums/w77/onestopjim/100_6663.gif" border="0" alt="Photo Sharing and Video Hosting at Photobucket">
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: camaro ford 9 inch car for parts
Koni Drag race struts Front coil over spring kit from PA racing
Need to know spring rate too
how much and where are you located in Michigan, thanks
Also, interested in trades for a killer rotating assembly? There's more im interested in, but dont have the cash
Need to know spring rate too
how much and where are you located in Michigan, thanks
Also, interested in trades for a killer rotating assembly? There's more im interested in, but dont have the cash
Last edited by scorchmaster; Apr 25, 2007 at 10:24 AM.
Supreme Member
iTrader: (2)
Joined: Jul 2005
Posts: 1,079
Likes: 0
From: currently Jacksonville NC
Car: 91 z28
Engine: 383 sbc, 88mm turbo a2w IC, CSU 750
Transmission: th-400 PTC 4000 stall
Axle/Gears: ford 9" 3.55 gear
Re: camaro ford 9 inch car for parts
how much for the the k-member, coilovers, and a-arms shipped to 72023, also interested in the rear end as well. thanks
Trending Topics
Member
Joined: Aug 2005
Posts: 119
Likes: 0
From: PA
Car: 1992 25th Anniversary White W/ Red
Engine: Procharged 383CI/ Soon LS2 Turbo
Transmission: Manual 700R4
Axle/Gears: 4:11/Auburn Posi/Moser Axle
Re: camaro ford 9 inch car for parts
interested in the front end set up k-member, coil overs, etc.
Member
Joined: Sep 2005
Posts: 162
Likes: 0
From: Vancouver,BC,Canada
Car: 91 z28 convert
Engine: 305
Transmission: 5speed
Re: camaro ford 9 inch car for parts
PA racing K member, A arms, Koni Drag race struts Front coil over spring
kit from PA racing
how much for all this?
kit from PA racing
how much for all this?
Supreme Member

Joined: Nov 2004
Posts: 1,347
Likes: 0
From: Connecticut
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
Re: camaro ford 9 inch car for parts
how much to have the rear shipped to 06902
Junior Member
iTrader: (2)
Joined: Oct 2005
Posts: 50
Likes: 0
From: Purdy,Mo
Car: 84z28
Engine: none
Transmission: TH400
Axle/Gears: moser9" 411gears 31spline
Re: camaro ford 9 inch car for parts
Do you still have the rear end/wheels & tires? Put me inline if you do.
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: camaro ford 9 inch car for parts
Hood and front bumper shipped to 27513? Pm me a quote please...i might actually drive up their to pick up parts but that will have to wait for june 12th...ill be taking a raod trip from nc to wi.Also how much for the full rear end with suspension parts.Thanks,Jeremy
Last edited by jersyboyy; May 24, 2007 at 08:47 AM.
Joined: Apr 2002
Posts: 62
Likes: 0
From: Highland Twp MI
Car: 1986 IROC-Z
Engine: 383 TPI
Transmission: 700R4 2500 stall
Axle/Gears: 3.70 Moser 9in
Re: camaro ford 9 inch car for parts
Im interested in the wheels and rear end...What are you looking to get? Im not to far away to pick up...Let me know thanks! irocz86350@hotmail.com
Supreme Member
iTrader: (25)
Joined: Jul 2004
Posts: 2,623
Likes: 0
From: Beautiful BC
Car: '88 IROC-Z / '91 Z28 / '91 GTA
Engine: LT4 Hot Cam 305 / L98 355 / MR 383
Transmission: 5-spd / 700R4 / 700R4
Axle/Gears: 3:45 / 3:23 / 3:23
Re: camaro ford 9 inch car for parts
I'd love that rear end.. has it sold already?
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM






