Hey thirdgen owners, I need some cash to start off my apprenticeship and have decided to part the 305 engine that I have. If you need anything from it let me know, also have a few other parts just lying around that I need to get rid of. I have not included any prices since there is tons of parts that came from the engine, just make an offer and I can see what I can do. If you need some pictures of any part, just let me know and will get one ASAP. Thanks, John

Other performance parts that I have:

KEITHBLACK PISTONS (new in box)
Bore (in): 4.030
Piston Material: Hypereutectic aluminum
Piston Style: Flat Compression Distance (in): 1.261
Dish Volume (cc): 7.00
Valve Reliefs: Two
Wrist Pin Style: Floating
Pin Diameter (in): 0.9272
Top Ring Thickness: 1/16 in.
Second Ring Thickness: 1/16 in.
Oil Ring Thickness: 3/16 in.

SPEED PRO RINGS(new in box)
specs are for the KB pistons

FREEZE PLUGS (new in package)

ACCEL 300+ FERRO-SPIRAL RACE WIRES (new)

ACCEL SPARK PLUG WIRES (used)
These were used and 2 have minor burns on the rubber coating

ACCEL IGNITION COIL (used)


82-92 2.5" FLOWTECH Y PIPE (new)

AC DELETE PULLEY

SET OF 305 TPI HEADS
These have glass beaded and painted red, nice looking
all assembled but some springs were tested weak, will need to replace them

do the headers have smog hook ups?

the header do not have the A.I.R injection sorry

I should mention that I do not have any of these parts, I had removed then since there is no emissions here. john

Price on headers/Y

Shipping on both to ip 27028?

pm sent

ACCEL 300+ FERRO-SPIRAL RACE WIRES (new)

Part # and price ?

Hey, part #7065 from summit. These are just the what you see in picture, There will not be any wire looms or lube for it. Forgot to mention that earlier. I have also attached a pic of it. Looking to get 50 for it. John

I'll take the ACCEL 300+ FERRO-SPIRAL RACE WIRES
PM sent

how much for the freeze plugs shipped to 33076