Going BB so I'm getting rid of all my SB stuff. Basically I'm looking to get rid of this stuff, but not give it away. I'm open to offers on everything. Price is just a base price, not set in stone.

- Cast 350 pistons with 'X' rods $20
- Stock 350 Crank w/ polished journals $20
- Holley 600cfm carb; Model #1850 $50
- Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
- Lunati Voodoo cam w/ lifters; 233/241 @ .050, less than 500 miles $100
- Comp Cams Double Roller Timing Set NIB $30
- Milodon oil pan w/ Milodon pickup & gasket NIB $150
- Melling HV oil pump w/ ARP oil pump shaft NIB $25
- SB long-tube headers $50
Also have a few other chrome accesories. Possibly looking to get rid of some Ross forged pistons also.

 

Could you send me pics of the headers.

 

what kind of chrome accecories? send pics of the chrome parts to JSimba711@NetZero.com

Also will the cam fit a stock 305 engine and not require alot of tuning?

 

take 150 shipped on the oil pan and oil pump setup? that is if it will fit my monte carlo. Might need a part number to make sure on the pan.
mg

 

TADailyDriver,
I have a chrome dipstick, chrome alternator brackets and a chrome timing cover. I will get some pics tonight. The cam will fit your 305 without pretty much any tuning. The most it might require one of those vaccum canisters.

Redbandit98,
I can do 160 shipped for the setup. It should fit your monte carlo without issue, just to be safe it's part #30401 through summit.

 

Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
Lunati Voodoo cam w/ lifters; 233/241 @ .050, less than 500 miles $100
Comp Cams Double Roller Timing Set NIB $30

What length rods?
Cam; HR or flat tappet , Lunati part #?
Comp part # on timing chain?

 

nope, damn i keep forgetting im putting in a one piece seal motor.

 

vetteoz,
The rods are 5.7,
The cam is a flat tappet, part #60104 except with lifters.
Can't remember the part # of the timing chain off the top of my head,
But pretty sure it's the Magnum one, I think it's like $35-$40.

 

Are the rods for press pins or bushed for floating? Thanks.

 

Floating, Part # LHA1-1 through summit

 

any pics of the holley?

 

need your email for pics

 

jcpiccolo@comcast.net

 

Interested if not sold ...
Is the timing chain / gear set Comp Cams #2136?
Does the chrome timing chain cover allow the extra depth required by the double roller chain? Pics to crg381@yahoo.com?

 

Timing gear/chrome cover is sold, sorry

 

info on headers?

 

Not quite sure on the brand, pretty sure they're hookers.
But they have 1 5/8 tubes with 3" collectors. The guy I bought them
from had them on a truck so he clearened them for his steering column.
Other than that, just a little dirty from sitting.

 

Still got the Lunati rods?

 

still got em

 

Here's what I got left:
- Ross Forged pistons; Bore: 4.150; VERY good shape. $200
- Lunati 4340 Forged Connecting Rods; Recond. & Ready to install $150
- Melling HV oil pump w/ ARP oil pump shaft NIB $25
- SB long-tube headers $50

 

What size are primaries, and collector? What brand?

 

u got a PM

 

Primaries are 1 5/8" with 3" collectors. Pretty sure they're hookers.

 

Well have some more stuff I'm trying to get rid of. Need to pay for my shortblock! Feel free to make offers!

-Ross forged pistons(10): 4.150", $130 shipped
-(7) Comp cams H-beams(Part # 5570-8)- $100 shipped
-(7) Forged 6" I-beams- $100 shipped
-(7) Forged Diamond 11cc domed pistons- $110 shipped.
I checked with Diamond and you can order 1 more of these
- NIB Melling HV oil pump with ARP shaft- $35 shipped
- NIB Autometer Elec. Oil Press. gauge w/ sender & fittings- $35 shipped.
- NIB ZZ502 Hydraulic roller cam with lifters; 224/234 @.050, .527/.544 lift
Looking for $160 shipped.
- Also have a set of Hooker SB long tube headers- $100 shipped.
These have 1 5/8" primaries with 3" collectors, Part # 2451HKR

 

Still got them headers? 75 shipped to 08872?

 

Still have them. Firm on the price. Headers are not cheap to ship.

 

If you change your mind pm me.

 

Still got the crank? Highly interested.

 

Everything except the headers are sold

 

can you send me a pic of the headers, kmwagner2000@hotmail.com
thanks,

 

Pics sent!

 

what is the lowest you can go and ship to 41076?
Thanks,

 

I can do 85 shipped or make me a reasonable offer.