Bought this car to fix up with my son and found a bad frame! Parting the car out to recoup my loss. Red exterior, grey interior, all body panels in nice shape, interior in nice shape. all gfx good except pass front. LMK what you need.

T-tops, Red Ext/grey interior, 305 TPI, 700r4 auto.

 

What a shame to see that car get torn apart.

 

pm sent

 

Yeah, I hate to do it too. I bought it to fix up for my son only to discover the frame is off by 3/4 of an inch, right side of car is short. On jackstands neither door will open, has cracks in trans tunnel and pass a-pillar is crumpled at the base. I'm upset, this would have been a great project provided it had a good platform to build from.

 

What about the wheels?
I'm guessing you would keep them?
If not, any info on them.
Thanks.
BTW, a GTA would be my all time most wanted car. Someday I'll own one, but I have a feeling that by the time I get one the doors won't open on jackstands either

 

I'll sell them eventually, but need them to move it around for now. It has new aftermarket wheels and tires with correct backspacing for a thirdgen. When I sell them, around $450 for all. If I were to guess, less than 2,000 miles on the 245/50/16 tires.

 

How Much for transmission and shipping to 24368

 

Not shipping the trans. You're better off buying one local.

 

The drivers GFX....how much if its in perfect shape?
The underside usually gets scuffed, thats OK. But if its split anywhere underside, etc. then thats not OK. I can tell you how to remove it also. THX

Does it have a leather e-brake handle and/or shifter?

 

Drivers GFX is not in perfect shape and not cost effective to ship. I have the leather e-brake handle and shifter, both perfect shape and both for 15 a piece, another 15 to ship so, 45 to your door. LMK

Magman

 

Do you have pics of the interior? Would be interested in buying a few things. Thanks.

 

Magman, could you get some pics of those items and send them to me please? PM me and if you need, Ill give you my e-mail addy.

Thank you, Michel

 

PAFORM350 - Interior is grey and going fast. Let me know what you need and I'll get you a pic of those items. PM your e-mail address for the pic and what you need.

Mikz86TA - PM sent

 

Sorry to see that you have to part it.

 

BUMP! Still have a lot of good parts left and most are pulled. I'm trying to get this out of my gargae by next week so if you need anything cut from it LMK ASAP. Still available: Serpentine setup, LeBra, TPI manifold with sensors, ECM and wiring harness, T-tops, 16x8 polished Al rims with correct backspacing for 3rd gens, lowering springs, fenders, dash, gauges, some plastics, nice grey carpet front and rear, hatch struts that work. GFX, Hood, doors, front/rear bumper covers, dash - could ship if willing to pay the extra shipping. Let me know what you need!

 

got a t-top headliner/ overhead console/ sunvisors..

 

Are the tail lights available?

 

lopezisgod - Only have the sunvisors but they're in need of new material.

IROCZ4BD3 - Yes, I have a nice set of tail lights - $50 for the set. Trying to get you a pic...

 

Here's the pics. No cracks, no scratches and in great condition.

 

I'll take them let me know how to get the $50 to you.

 

IROCZ4BD3 - PM sent.

 

1. Lowering springs, front and rear with isolators - 125.00 plus shipping. Check out the stance of the GTA pictured abovefor ride height, it was in stock form.
2. Rear Hatch struts, good working condition - 30 plus shipping
3. Complete set of wheels without tires, pictured above. They are 16x8 Cruiser Aluminum alloy with the correct backspacing for Thirdgens, lugnuts included. They sell new for 120 a piece, half price deal here - asking 240 for the set plus shipping.

 

could you send pix of the spoiler to vasquezmrysvll@aol.com . thanks -art

 

vasquezmrysvll - Pics sent

 

Still available, add shipping to all prices:
Both fenders - $35.00 each
Rear bumper cover - $75.00
Front bumper cover - $100.00
Le Bra - $40.00
Both headlight assemblies with motors - $80.00
Full set of progresive lowering springs, not sure of brand but you can see the ride height above, used and could use new paint - $125
Serpentine pulley setup - $100
T-Tops, small dia pin - Tinted glass, nice condition - $50.00
Gauge cluster, 140 MPH - $65.00
16x8 Polished aluminum wheels(see above), no tires - $240.00
Wiring harness with ECM - $100
Set of door panel arm rests/handle - $40.00
Black cloth covered plastic Sail Panels (aftermarket replacements) - $25.00
Mint dash pad - $90.00
Cargo cover - $30.00
TPI fuel lines - $25.00
Passenger Fog light assy w/pigtail - $30.00
TPI ducting with MAF sensor, complete from TB to air box - $100.00
All GFX except right front- PM me a reasonable offer of the piece you need.
Doors/Hood/carpet/2.77 BW rearend available for pickup in WA.

 

Could I possibly get one of the Gta bird emblems for the pass. side?

 

Sorry, son already claimed them as a memento!

 

Darn, thx anyway

 

looking for both front lower control arms in good condition and i would need them shipped to NJ zip code 07508 if in good condition and the ball joint sockets arent loose.

Thanks
Bill

 

Sorry, I don't have the car anymore and I didn't pull the front LCAs.

 

TTT

 

Got my parts in the mail today!! Top notch guy to deal with!!! Packing was excellent, shipping was super fast, and comunication was awesome!! Thanks Magman!! Good luck with the rest!

 

Thanks! Still have fenders, front/rear bumper covers, all GFX, analog dash, misc rear plastics, Glass T-tops, hatch struts, tail lights wcenter section, door handles, heater control, black sail panels and more, just ask. Prices are dropping, I need to get this stuff cleared out.

 

how much for the tail lights and what would shipping be to 06424

 

Tail lights are a package deal. The drivers side is in great condition and would sell it for $35 alone. The passenger side has a mounting stud broken off, you can't tell when it's installed other than it lets air in and gets dingy looking. The center section also had damaged mounts. The mounts to the center section broke when it was removed. The center section is still usable but will need washers to help secure once installed. All for a fair price; $50.00 shipped. Use what you want, but basically pay for the drivers side plus shipping and I'll give you the rest.

 

do you still have the wiring harness and ecu??

 

Wiring harness, TPI and ECM sold the first day. Sorry

 

aww lol thanks tho what all you got left?

 

Got any of the sway bars? What sizes are they?

 

How much for the MAF sensor? PM your shipped price
Kansas city, mo 64137

 

Sorry, MAF sensor has been sold.

 

i need the two bolts and nuts that hold the torque arm to the rear.. and i also need the two u joint straps.. how much shipped to 70124..

 

I'll have to check my box of nuts/bolts. I'm pretty sure I have em. It's gonna cost more to ship than what I'd charge you though..LOL.

 

Yep, have them. How's $12.00 shipped sound? I'd give them to ya if you were here, but I'll need to cover shipping.

 

Still available, add shipping to all prices and LMK if you need a pic:
Both fenders - $35.00 each
Rear bumper cover - $50.00
Aluminum honeycomb rear bumper - $50.00
Front bumper cover - $100.00
Le Bra - $30.00
Both headlight assemblies with motors - $50.00
Full set of progressive lowering springs. Not sure of brand, but you can see the ride height above. Used and could use new paint - $100
T-Tops, small dia pin - Tinted glass, nice condition need new outer seals - $40.00
Black cloth covered plastic Sail Panels (aftermarket replacements) - $20.00
Cargo cover - $30.00
TPI fuel lines - $25.00
Hatch struts - $25.00
Pass mirror - $20.00
Pass fog light assy w/pigtail - $30.00
Gas tank door - $25.00
Taillight wiring harness - $25.00
Windshield Wiper motor w/delay - $20.00
Misc Grey interior plastics - OFFER
Lots of misc nuts/bolts collected over the years(dash screws, small console bolts, etc...)
All GFX except right front- PM a reasonable offer of the piece you need.
* Hood/Hatch with wraparound spoiler and defog/2.77 BW rearend available for pickup in WA.

 

yeah that's great. Send me your paypal address and I'll send you the money. Also do you have the bolts and nuts for the straps. Thanks

 

Camarojokester - I'm sure I do. I'll throw them in also. PM'ed my Paypal.

 

Got the door Panels? If so, send me some pics Please.

Bradley23150@yahoo.com

 

Nope, door panels have been sold.

 

Still have the left driverside fender?