s/r torquers
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
s/r torquers
selling a set of s/r torquers summit p/n 042660-1
-professionaly modified for comp cams 986-16 (1.43") springs (installed)
-67cc chambers
-170cc intake runners
-3/8 screw in rocker studs
heads have less than 1000 miles on them and are still instaled in my car thats in storage for winter. nothing wrong with them just getting greedy. make offers. im looking for a set of heads with 200cc runners,heart shaped chambers and 64cc or slightly smaller chambers. will consider trades within 175 miles of lancaster pa
-professionaly modified for comp cams 986-16 (1.43") springs (installed)
-67cc chambers
-170cc intake runners
-3/8 screw in rocker studs
heads have less than 1000 miles on them and are still instaled in my car thats in storage for winter. nothing wrong with them just getting greedy. make offers. im looking for a set of heads with 200cc runners,heart shaped chambers and 64cc or slightly smaller chambers. will consider trades within 175 miles of lancaster pa
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
Re: s/r torquers
the heads out of the box are 850 complete. they have comp cams 986 springs and matching retainers now and 3/8 screw in studs. they are bolt on go.>>MAKE OFFERS<<ill start at $725 plus shipping>>MAKEOFFERS<<
Trending Topics
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
Re: s/r torquers
just ran a 13.16 @ 110 with these heads on a 350 with flat tops, a comp roller cam with 212/218 duration at .050 and 487/495 ,airgap(not an RPM-AIRGAP) intake ,650 edelbrock,NWC t-5 trans,3:73s and radials
Thread
Thread Starter
Forum
Replies
Last Post
MattW
Aftermarket Product Review
2
Jul 18, 2001 12:13 AM